Dieter Schmid's Fine Tools
Replacement Parts for Juuma Planes

Replacement Parts for Juuma Planes

Brass Yoke and Pin for Juuma Planes No 4, No 5, No 6, No 7
When setting up the iron adjustment assembly on a cast-iron hand plane in, the iron and chipbreaker only require light clamping. The iron will move up and down if the adjustment lever is used or if the blade adjustment knob is turned. However, inexperienced woodworkers tend to clamp the iron too firmly in place which could break the little y-shaped brass yoke.
We are often asked why the yoke is only made of brass, and not steel. The explanation is simple: a steel yoke would not yield and other, more expensive, parts could break instead.
Code 300250CartPrice € 2.95
Brass Pin
Brass Pin for Y-Adjusting Lever
Dimensions 21 x 3 mm
Code 300256CartPrice € 0.45
Steel Y-Adjustment Lever for JUUMA Planes
If you insist on a steel yoke....
Code 300254CartPrice € 2.95
Brass Screw
Brass Screw for JUMMA Block Plane Cap
Pan Head Screw
Width 16 mm
Thread M5
Code 300258CartPrice € 0.95
Chipbreaker Screw for Juuma Planes
No 4, No 5, No 6, No 7

This is the screw that holds blade and chipbreaker together.
Thread M8
Length of thread 6 mm
Head diameter 16 mm
Code 300251CartPrice € 0.95
Chipbreaker for Juuma Planes No 4, No 5
Width 50.8 mm
Thickness 3 mm
Threadhole M8
Fits also other no 4 und no 5 planes.
Drawing
Code 300252CartPrice € 12.50
Chipbreaker for Juuma Planes No 6, No 7
Width 60 mm
Thickness 3 mm
Threadhole M8
Fits also other no 6 und no 7 planes.
Drawing
Code 300253CartPrice € 13.50
You are here:   Homepage   →   Planes   →   Replacement Parts for Juuma Planes