Bevel-Up Blade Case
VERITAS

Available, delivery time: 1-3 businessdays within Germany
Product information
These storage boxes are the same polypropylene boxes that are also supplied with every plane and plane blade from Veritas. The boxes are one-piece, so no parts can get lost. They consist of two shells that are firmly connected with a hinge and closed using two side fasteners. This makes them both easy to handle and secure when closed. The protrusions in the boxes fit precisely into the holes in the plane blade. They secure the blade and ensure that the cutting edge does not come into contact with the walls of the box.
Each box has a hole for hanging. Additionally, the boxes are designed to interlock, so you can stack multiple boxes to store them on a shelf or in a drawer. The scope of delivery includes two stickers that you can use to label the box visibly. Also included is a piece of corrosion protection cardboard (which contains a slightly volatile substance that forms a fine protective layer on the blade) to ensure that no rust forms on the blade during storage. The depicted plane blade is not included in the delivery.
Storage Box for Veritas Plane Blades with Bevel Up
This storage box measures 66 mm x 140 mm and is 12 mm thick (2-5/8 × 5-1/2 × 1/2 inch). It fits all Veritas block planes (including the „Apron Plane” and the block plane with skewed iron, small low-angle block planes, and small planes with a bevel-up iron, as well as small scrub planes).
Here are the dimensions for plane blades not listed here:
Max. plane blade width 58 mm
Max. plane blade length 121 mm
Max. plane blade thickness 5 mm
The width tapers to 45 mm in the upper area of 45 mm
The protrusions in the boxes, which are intended to secure the blade, may need to be partially cut away for blades other than those mentioned.
Login