Dieter Schmid's Fine Tools
Vices

Vices

Heuer vices, made in Germany, are made of forged steel; they're virtually indestructible and manufactured to the highest precision. They are not influenced by trends or fashions, make best use of materials, are accurate and are designed to last for generations. They are simply the best vices available today!

We also offer vices adjustable in three axes made of steel and cast iron sourced in Europe. These are very solid in contrast to other vices of this type on offer made of cast aluminium.

Our mini-vices made of solid cast iron are ideal for all smaller jobs in the workshop or at home. They're especially practical for on-site jobs when all you want is a small clamping device, rather than the burden of larger and heavier clamping fixtures.

Heavy cast-iron vice from York

This heavy, stable vice is made by York, a Czech firm with a long tradition in toolmaking. An integrated rotary base lets you rotate the vice by up to 45° to either side so that even awkward workpieces can be clamped in a good working position. The collet pliers on the locking screw can be replaced by a standard M10 nut if you only need to rotate the vice occasionally or if they might get in the way. You can also mount the vice without the rotary base. The spindle is enclosed by a cylinder to inhibit the build-up of dirt. The back of the vice is fashioned as an anvil. The exchangeable jaws are made of high-quality steel.

Note: the vice doesn’t have a safety stop at the end of the thread to prevent accidental unscrewing. The spindle can then turn freely, but the front jaw of the vice won’t drop away from the main body. To remove the front jaw, it needs to be pulled out a further 5 cm.

York vice with jaw width 100 mm
Clamping width 100 mm
Clamping depth 70 mm
Weight 12.5 kg
Code 307782CartPrice € 79.90

York vice with jaw width 125 mm
Clamping width 100 mm
Clamping depth 80 mm
Weight 20 kg
Code 307507CartPrice € 139.00

York vice with jaw width 125 mm with V-groove
This 125 mm model comes with additionalV-groove jaws for pipes below the main jaws. It’s easy to remove them if they are in the way of workpieces that get wider at the bottom.
Width of jaws 125 mm
Clamping width 100 mm
Clamping depth 80 mm
Weight 20 kg
Code 307500CartPrice € 159.00
Pair of steel replacement jaws for York vices

Pair of steel replacement jaws 100 mm
Size 100 x 22 x 12 mm
Centre-to-centre hole distance for fixing screws 60 mm
Hole diameter 7 mm
Code 307783CartPrice € 12.90

Pair of steel replacement jaws 125 mm
Size 125 x 25 x 15 mm
Centre-to-centre hole distance for fixing screws 76 mm
Hole diameter 7 mm
Code 307501CartPrice € 16.90
Magnetic aluminium jaws
For delicate workpieces! These magnetic jaws made of aluminium with various types of lining are ideal for delicate workpieces. Suitable for York vices and other vices with the same jaw size.

Pair of magnetic aluminium jaws 100 mm
Code 307784CartPrice € 9.90

Pair of magnetic aluminium jaws 100 mm cork lined
Code 307785CartPrice € 10.90

Pair of magnetic aluminium jaws 100 mm rubber lined
Code 307786CartPrice € 10.90

Pair of magnetic aluminium jaws 100 mm felt lined
Code 307787CartPrice € 10.90


Pair of magnetic aluminium jaws 125 mm
Code 307502CartPrice € 10.90

Pair of magnetic aluminium jaws 125 mm cork lined
Currently not in stock!
Code 307503Cart
Price € 12.90

Pair of magnetic aluminium jaws 125 mm rubber lined
Code 307504CartPrice € 12.90

Pair of magnetic aluminium jaws 125 mm felt lined
Code 307505CartPrice € 12.90
Heuer Compact vice

Small, fast and flexible: this sums up the new, small vice from Heuer with speed-clamping and its design emphasis on functionality. Weighing just 4.5 kg, yet sporting a muscular gripping force of 10 kN, the Heuer Compact is the lightweight in its class. It has a generous clamping depth and is fully expandable with many standard accessories. The undoubted highlight, however, is the all-new and revolutionary speed-clamping feature, Heuer Quicklaunch. More ...

Jaw width 120 mm
Clamping width 130 mm
Clamping depth 65 mm
Weight 4.5 kg
Code 302480CartPrice € 159.95
Heuer Compact set

The Heuer Compact vice is now available as a practical toolbox set! Ideal for mobile workshops!
Includes:
Table clamp for table tops up to 60 mm thickness
4 Magnefix jaw protectors: type N, F, G, P
Plastic toolbox 135 x 375 x 350 mm
Weight 7.6 kg
Code 302483CartPrice € 295.00
Heuer parallel vice
Heuer vices are made of forged steel, they're virtually indestructible and manufactured to the highest precision. The front and rear jaws as well as the guide rail with anvil are drop-forged. The jaws are surface-hardened and forged-on pipe jaws are standard. The clamping force is optimally distributed by a central spindle having a double-lead trapezoidal thread that is effectively protected from contamination. Click on image to enlarge.

Vice with jaw width 100 mm
Clamping width 125 mm
Clamping depth 50 mm
Weight 4.5 kg
Code 302450CartPrice € 129.90

Vice with jaw width 120 mm
Clamping width 150 mm
Clamping depth 65 mm
Weight 9 kg
Code 302459CartPrice € 169.95
Heuer parallel vice with exchangeable jaws
Same quality as above, but with exchangeable jaws. The hardened jaws are serrated on one side and smooth on the other. The jaws are hardened and can be turned, reversed and swapped. Click on image to enlarge.

Parallel vice with jaw width 120 mm
Clamping width 150 mm
Clamping depth 65 mm
Weight 9.0 kg
Code 302460CartPrice € 219.90

Parallel vice with jaw width 140 mm
Clamping width 200 mm
Clamping depth 80 mm
Weight 16.0 kg
Code 302431CartPrice € 317.00

Parallel vice with jaw width 160 mm
Clamping width 225 mm
Clamping depth 100 mm
Weight 27.0 kg
Code 302328CartPrice € 439.00
Swivelling base for Heuer parallel vices
The Heuer swivelling base allows the vice to be rotated by 360° in one plane to exactly the position you need for working on a given item. The small Heuer spindle key allows the swivelling base − and thus the vice − to be locked precisely and securely in the desired position.

Swivelling Base for HEUER Vise with Jaws 100 mm
Also suitable for Heuer Compact with jaw width 120 mm!
Code 302451CartPrice € 37.50

Swivelling base for vice with jaw width 120 mm
Code 302461CartPrice € 55.50

Swivelling base for vice with jaw width 140 mm
Code 302432CartPrice € 80.90

Swivelling base for vice with jaw width 160/180 mm
Code 302433CartPrice € 99.90
Table clamp for Heuer parallel vices
The Heuer table clamp is perfect for fastening the vice firmly to the worktop and removing it at a moment’s notice. No need for drilling holes. This frees up space on the worktop and avoids the time-consuming dismounting and remounting of the whole vice.
Image with vice mounted in position
Exact dimensions − important when using other vice brands

Table clamp for Heuer vice with jaw width 100 mm
Also suitable for Heuer Compact with jaw width 120 mm!
Code 302452CartPrice € 35.70

Table clamp for Heuer vice with jaw width 120 mm
Code 302467CartPrice € 52.30
Heuer rotary clamp (two in one)

The Heuer rotary clamp combines the best features of two useful add-ons for the Heuer vice:

First, the swivelling base that allows the vice to be rotated freely by 360° in one plane. The proven Heuer spindle key allows both the rotary clamp and the swivelling base to be locked precisely and securely in the desired position.

Secondly, the Heuer table clamp that allows the vice to be mounted flexibly on any worktop up to 60 mm thick ­ without the need for holes, without risk of damage, and quick as a flash. This creates space on the worktop and avoids the time-consuming dismounting and remounting of the whole vice.

The Heuer rotary clamp is quick and easy to mount and dismount. The sturdy clamping spindle with the Heuer spindle key makes for easy and safe handling. The four screw slots fit Heuer vice sizes 100 and 120.

Rotary clamp for Heuer vice with jaw width 100 mm
Weight 1.0 kg
Code 302454CartPrice € 79.00

Rotary clamp for Heuer vice with jaw width 120 mm
Weight 1.7 kg
Code 302455CartPrice € 115.00
Heuer Lift
Heuer Lift
Device for automatic height adjustment for Heuer vices. Precisely matched to the weight of the vice, the pneumatic spring practically takes the total weight of the vice as you raise or lower it to the desired height. A clamping lever locks the vice securely in position.
Height adjustment 0 to 200 mm
Rotation 360°
Weight 9 kg
Vice not included!

Heuer Lift for vice with jaw width 100 mm and Heuer Compact vice
Code 302331CartPrice € 189.00

Heuer Lift for vice with jaw width 120 mm
Code 302462CartPrice € 189.00

Heuer Lift for vice with jaw width 140 mm
Currently not in stock!
Code 302332Cart
Price € 189.00

Heuer Lift for vice with jaw width 160 mm
Currently not in stock!
Code 302333Cart
Price € 189.00
HEUER Stand Lift
HEUER Stand Lift
The Heuer Stand-Lift is the perfect add-on for a Heuer vice for ergonomic working without a workbench.

No matter how body sizes, workpieces or processing needs may differ, the Heuer Stand-Lift makes it easy to position the vice in the optimal working position.

An extremely robust foot makes for flexible and space-saving working without a workbench. Even in constrained spaces you can work unimpeded and from any side even on unwieldy workpieces.
Height adjustment 0 to 200 mm
Rotation 360°
Weight approx. 21 kg
Vice not included!

Heuer Stand Lift for vice with jaw width 120 mm
Code 302435CartPrice € 265.00

Heuer Stand Lift for vice with jaw width 140 mm
Code 302436CartPrice € 267.00

Heuer Stand Lift for vice with jaw width 160 mm
Code 302437CartPrice € 269.00
Heuer Fold for Heuer vices with jaw width 120 mm
The ideal add-on for the vice. The Heuer Fold allows the vice to be folded away underneath the workbench at a moment’s notice, freeing up the workspace above. This makes for optimal ergonomics especially in cramped conditions. In working position the mounted vice is firmly attached to the worktop and free of any vibration.
Space requirements
Vice NOT included!
Code 302465CartPrice € 279.00
Heuer Fold-Lift, fold-away and height adjustment for Heuer vices with jaw width 120 mm
Fold, lift, rotate − the Fold-Lift does it all! When not in use the vice can be folded away underneath the worktop, freeing up the workspace above. In working position the vice can be adjusted in height by approx. 175 mm and rotated by 360°.
Vice NOT included!
Code 302466CartPrice € 479.00
Magnefix jaw protectors for Heuer vices
These jaw protectors have a strong base body of aluminium or are made entirely of polyurethane. Integral magnets hold the Magnefix jaw protectors securely on the vice. The magnetic force does not penetrate to the clamping faces! Price per pair!

Jaw protectors with jaw width 100 mm CodePrice
Aluminium - type N
for clamping rough to medium machined workpieces
Code 302496CartPrice € 24.90
Felt - type Fi
for clamping extremely delicate workpieces
Code 302499CartPrice € 32.30
Rubber - type G
for clamping wooden and plastic parts and thin-walled tubes
Code 302498CartPrice € 27.50
Aluminium prismn - type P
for clamping oval, round and flat workpieces
Code 302495CartPrice € 30.00
Fibre - type F
for clamping workpieces with precision-milled, planed and polished surfaces
Code 302497CartPrice € 27.50
Polyurethane grooved - type PR
for clamping delicate workpieces of all types
Code 302493CartPrice € 27.50
Polyurethane prism - type PP
for clamping delicate round and oval workpieces
Code 302494CartPrice € 27.50

Jaw protectors with jaw width 120 mm CodePrice
Aluminium - type N
for clamping rough to medium machined workpieces
Code 302476CartPrice € 26.20
Felt - type Fi
for clamping extremely delicate workpieces
Code 302475CartPrice € 33.90
Rubber - type G
for clamping wooden and plastic parts and thin-walled tubes
Code 302473CartPrice € 29.30
Aluminium prismn - type P
for clamping oval, round and flat workpieces
Currently not in stock!
Code 302472Cart
Price € 31.10
Fibre - type F
for clamping workpieces with precision-milled, planed and polished surfaces
Code 302474CartPrice € 29.30
Polyurethane grooved - type PR
for clamping delicate workpieces of all types
Code 302470CartPrice € 29.30
Polyurethane prism - type PP
for clamping delicate round and oval workpieces
Code 302471CartPrice € 29.30

Jaw protectors with jaw width 140 mm CodePrice
Aluminium - type N
for clamping rough to medium machined workpieces
Code 302440CartPrice € 29.90
Felt - type Fi
for clamping extremely delicate workpieces
Code 302444CartPrice € 38.50
Rubber - type G
for clamping wooden and plastic parts and thin-walled tubes
Code 302442CartPrice € 33.50
Aluminium prismn - type P
for clamping oval, round and flat workpieces
Code 302439CartPrice € 35.90
Fibre - type F
for clamping workpieces with precision-milled, planed and polished surfaces
Code 302443CartPrice € 33.50
Polyurethane grooved - type PR
for clamping delicate workpieces of all types
Code 302441CartPrice € 33.50
Polyurethane prism - type PP
for clamping delicate round and oval workpieces
Code 302438CartPrice € 33.50

Jaw protectors with jaw width 160 mm CodePrice
Aluminium - type N
for clamping rough to medium machined workpieces
Code 302340CartPrice € 31.90
Felt - type Fi
for clamping extremely delicate workpieces
Code 302341CartPrice € 39.90
Rubber - type G
for clamping wooden and plastic parts and thin-walled tubes
Code 302342CartPrice € 33.90
Aluminium prismn - type P
for clamping oval, round and flat workpieces
Code 302343CartPrice € 37.90
Fibre - type F
for clamping workpieces with precision-milled, planed and polished surfaces
Code 302344CartPrice € 33.90
Polyurethane grooved - type PR
for clamping delicate workpieces of all types
Code 302345CartPrice € 33.90
Polyurethane prism - type PP
for clamping delicate round and oval workpieces
Code 302346CartPrice € 34.90
Mini vice
This mini vice made of cast iron is suited for all types of work on small workpieces. In contrast to questionable aluminium or steel-plate designs frequently offered in this size, this vice impresses with its solid construction. The jaws have horizontal and vertical V-grooves for clamping pipes! Jaw size 45 mm, jaw opening 50 mm, weight 0.6 kg. Overall length with jaws closed 100 mm. Max. worktop thickness 30 mm.
Code 307770CartPrice € 27.50
Mini vice - rotates through three axes
As above, but can rotate through three axes; weight 0.9 kg. The ball joint is tightened with a 36 mm spanner, but a simple pipe wrench does the job as well. Max. worktop thickness 52 mm.
Code 307772CartPrice € 37.50
You are here:  Homepage   →  Workshop Equipment   →  Vices