OTORO Pipe Clamp for 3/4 inch Pipes with T-Handle
Available, delivery time: 2-3 days
Product information
A clear and simple design made from a few parts characterizes this pipe clamp. The Japanese tool design company OTORO developed this pipe clamp with the spindle precisely mounted in extension of the pipe. This avoids tilting or bending and allows the pressure to be significantly increased without effort. An included wire ring can be screwed onto the thread at the open end. This prevents the movable part from accidentally falling off. The spindle travel of just 17 mm may seem a bit limited, but it is entirely sufficient as the movable jaw can be brought close to the wood to be glued.
Delivery WITHOUT water pipe and without wood!
Housing made of cast iron
For 3/4 inch water pipe (outer diameter 27 mm)
Jaw height 44 mm
Jaw width 45 mm
Thread spindle adjustment up to 17 mm
Made in Taiwan
| Properties | |
|---|---|
| Thread spindle adjustment | up to 17 mm |
| Jaw width | 45 mm |
| Jaw height | 44 mm |
| Origin | Taiwan |
| Material | Cast iron |
| Pipe diameter | 3/4 inch (outer diameter 27 mm) |
Login
Also interesting
Available, delivery time: 2-3 days