The advantage of this circle cutter is that you do not have to set the cutter blades separately. You loosen the two star knobs and simply slide the two arms to the desired position. A bowden cable ensures that the two arms move symmetrically in opposite directions. This is a very much simpler and faster method for setting the desired hole diameter than is possible with conventional circle cutters. Once you have set the cutters to the right position you simply tighten the two star knobs again. The bowden cable can be retightened.
For cutting precise circles up to 200 mm in diameter in wood, wood composites and also particle boards. Blades with inside and outside chamfers ensure clean and splinter-free hole edges. Includes additional centring point for thin materials. Supplied with allen key.
Bore diameter infinitely adjustable from 60 to 200 mm
Maximum drilling depth 30 mm from one side
Maximum drilling depth 60 mm from two sides
Speed max 1000 min-1
We recommend that you start at a much lower speed and then gradually increase the speed until you reach the ideal speed for your material.
Shank 10 mm
Weight 550 g
Setting the bore diameter
Allen key and additional centring point
|Correct: Blades cut inside and outside||Wrong: Blades cut only inside||Wrong: Blades cut only outside|
Inside diameter 165 mm
Outside diameter 200 mm
Depth 125 mm
This Safety and Dust Cover fits:
How to use
Not suitable in conjunction with 200 mm and 300 mm bars. When using with our STAR-M circle cutters, you do not need the adaptor, which comes with the cover. The adaptor is necessary, when you use the cover with other boring tools.
Video, in Japanese