Dieter Schmid's Fine Tools
Shinto Saw Rasps

Shinto Saw Rasps

This unique wood rasp construction is made of 10 hardened saw blades zizag bent and riveted together to produce a wide cutting surface. Because of this waffled design clogging is eliminated. They are made for working on wood, but are suitable too for soft metals, plastics and plaster. With this rasp material can be removed extremly fast.

The teeths extend to the edge which makes working in corners very easy.

Each rasp has two working sides. The coarse side is for shaping and fast removel of material and the fine side for finish cut. Made in Japan!

Shinto Saw Rasp with Handle This rasp you hold with both hands like many other woodworking tools such as planes. The raised handle allows the use over large surfaces. The blade can be quickly reversed or exchanged by means of the knurled knob in front of the handle.
Pitch coarse side 2.5 mm (10 TPI)
Pitch fine side 1 mm (25 TPI)
Blade length 250 mm (11 inch)
Width of cutting surface 29 - 30 mm (1-3/16 inch)
Total length with handle 380 mm (15 inch)
Code 313800CartPrice € 23.90
Replacement Blade for Shinto Saw Rasp Pitch coarse side 2.5 mm (10 TPI)
Pitch fine side 1 mm (25 TPI)
Blade length 250 mm (11 inch)
Width of cutting surface 29 - 30 mm (1-3/16 inch)
Total length with handle 380 mm (15 inch)
Code 313801CartPrice € 14.90
Shinto Saw Rasp with fixed Handle This rasp you hold with one or both hands like any other conventional rasp.
Pitch coarse side 2.5 mm (10 TPI)
Pitch fine side 1 mm (25 TPI)
Width of cutting surface 29 - 30 mm (1-3/16 inch)

Shinto Saw Rasp Blade length 228 mm (9 inch)
Total length with handle 345 mm (13-1/2 inch)
Code 313805CartPrice € 15.90

Shinto Saw Rasp Blade length 280 mm (11 inch)
Total length with handle 395 mm (15-1/2 inch)
Code 313806CartPrice € 17.90
You are here:   Homepage   →   Rasps and Files   →   Shinto Saw Rasps