Dieter Schmid's Fine Tools
Titebond Wood Glue

Titebond Wood Glue

Titebond III Ultimate Wood Glue
Titebond III Ultimate Wood Glue
Titebond III Ultimate Wood Glue is the first one-part, water cleanup wood glue ever offered that is proven waterproof. The waterproof formula passes the ANSI/HPVA Type I water-resistance specification and offers superior bond strength, longer open assembly time and lower application temperature.

Titebond III is non-toxic, solvent free and cleans up with water - safer to use than traditional waterproof wood glues. It provides strong initial tack, sands easily without softening and is FDA approved for indirect food contact (cutting boards). The ultimate in wood glues - ideal for both interior and exterior applications.

Physical Properties
Type: Advanced Proprietary Polymer
State: Liquid
Dried Film: Light brown
Storage life: 24 months in tightly closed containers below 23°C.
Chalk temperature: Approximately 8°C
Application Guidelines
Application Temperature: Above 8°C
Open Assembly Time: 8-10 minutes (21°C./50%RH)
Total assembly time: 20-25minutes (21°C./50%RH)
Minimum required spread: Approximately 5 square meter per liter
Required clamping pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Method of Application: Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
Limitations
Not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Use when temperature, glue and materials are above 8°C. Store product below 24°C. Storage above this temperature may cause product to thicken and reduce the usable shelf life. If thickened, shake vigorously by firmly tapping bottle on a hard surface until product is restored to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.
Caution Statement
No caution information is needed. Please refer to the Safety Data Sheet for further information.

Safety data sheet

Titebond III Ultimate Wood Glue 8oz (226 g)
Code 201003CartPrice € 7.90
Base price € 34.96 per kg

Titebond III Ultimate Wood Glue 16oz (452 g)
Code 201004CartPrice € 12.90
Base price € 28.54 per kg

Titebond III Ultimate Wood Glue 1quart (946 g)
Code 201005CartPrice € 18.90
Base price € 19.98 pro kg

Titebond III Ultimate Wood Glue 1 gallon (3785 g)
Code 201006CartPrice € 52.90
Base price € 13.98 pro kg
Titebond II Premium Wood Glue
Titebond II Premium Wood Glue
Titebond II Premium Wood Glue is the only leading brand, one-part wood glue that passes the ANSI Type II water-resistance specification. It is ideal for exterior woodworking projects, including outdoor furniture, birdhouses, mailboxes, planters and picnic tables.

Titebond II Premium provides a strong initial tack, fast speed of set, superior strength and excellent sandability. It is FDA approved for indirect food contact (cutting boards) and is ideal for radio frequency (R-F) gluing systems.

Physical Properties
Type: Cross-linking polyvinyl acetate
State: Liquid
Dried Film: Translucent, yellow
Storage life: 24 months in tightly closed containers below 23°C.
Chalk temperature: Approximately 13°C
Application Guidelines
Application Temperature: Above 13°C
Open Assembly Time: 3-5 minutes (21°C./50%RH)
Total assembly time: 10-15 minutes (21°C./50%RH)
Minimum required spread: Approximately 5 square meter per liter
Required clamping pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Method of Application: Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
Limitations
Titebond II Premium Wood Glue is not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 13°C. Due to low pH, product may cause corrosion on metal surfaces, test product before using where rusting/corrosion may be of concern. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.
Caution Statement
EYE AND SKIN IRRITANT. Contains aluminum chloride. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.

Safety data sheet

Titebond II Premium Wood Glue 8oz (226 g)
Code 201013CartPrice € 5.90
Base price € 26.11 per kg

Titebond II Premium Wood Glue 16oz (452 g)
Code 201014CartPrice € 8.90
Base price € 19.69 per kg

Titebond II Premium Wood Glue 1 quart (946 g)
Code 201015CartPrice € 13.90
Base price € 14.69 per kg
Titebond II Extend Wood Glue
Titebond II Extend Wood Glue
Titebond II Extend Wood Glue combines weatherproof performance (ANSI Type II water-resistance) with a slower speed of set. It is ideal for exterior applications that involve more complex assemblies. It also provides a translucent glue line, offers excellent sandability and is unaffected by finishes.

Titebond II Extend offers superior performance on all common wood species, particleboard, MDF, plywood and other porous materials. In addition, it is compatible for use with Hot Press and radio frequency (R-F) gluing systems.

Physical Properties
State: Liquid
Dried Film: Cream
Storage life: 12 months in tightly closed containers below 23°C.
Chalk temperature: Approximately 16°C
Application Guidelines
Application Temperature: Above 16°C
Open Assembly Time: 15 minutes (21°C./50%RH)
Total assembly time: 10-25 minutes (21°C./50%RH)
Minimum required spread: Approximately 5 square meter per liter
Required clamping pressure: Enough to bring joints tightly together (generally, 30-80 psi for HPL, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Method of Application: Easily spread with a roller spreader or brush or may be transferred to plastic bottles for finer gluing applications.
Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
Limitations
Titebond II Extend Wood Glue is not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 16°C. Due to low pH, product may cause corrosion on metal surfaces, test product before using where rusting/corrosion may be of concern. Freezing may not affect the function of the product but may cause it to thicken. If product appears to have settled, stir to ensure uniformity. Because of variances in the surface of treated lumber, it is a good idea to test for adhesion. Read MSDS before use. NOTE: STIR PRODUCT BEFORE USE TO ENSURE UNIFORMITY. KEEP FROM FREEZING
Caution Statement
EYE AND SKIN IRRITANT. Contains urea. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.

Safety data sheet

Titebond II Extend Wood Glue 16oz (452 g)
Code 201022CartPrice € 10.90
Base price € 24.12 per kg
Titebond Original Wood Glue
Titebond Original Wood Glue
Titebond Original Wood Glue is the industry standard for woodworking. It provides a strong initial tack and fast speed of set to reduce clamp time. It also develops a bond stronger than the wood itself, offers excellent sandability and is unaffected by finishes.

Titebond Original can help any woodworker achieve professional-looking results. It is ideal for wood, hardboard, particleboard, leather, cloth and most other porous materials. Titebond Original is easy to use, non-toxic and cleans up with water.

Physical Properties
Type: Aliphatic resin emulsion
State: Liquid
Dried Film: Translucent
Storage life: 24 months in tightly closed containers below 23°C.
Chalk temperature: Approximately 10°C
Application Guidelines
Application Temperature: Above 10°C
Open Assembly Time: 4-6 minutes (21°C./50%RH)
Total assembly time: 10-15 minutes (21°C./50%RH)
Minimum required spread: Approximately 5 square meter per liter
Required clamping pressure: Enough to bring joints tightly together (generally, 30-80 psi for HPL, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Method of Application: Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
Limitations
Titebond Original Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 10°C. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.
Caution Statement
EYE AND SKIN IRRITANT. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.

Safety data sheet

Titebond Original Wood Glue 8oz (226 g)
Code 201028CartPrice € 4.90
Base price € 21.68 per kg

Titebond Original Wood Glue 16oz (452 g)
Code 201029CartPrice € 7.90
Base price € 17.48 per kg

Titebond Original Wood Glue 1quart (946 g)
Code 201030CartPrice € 11.90
Base price € 12.58 per kg

Titebond Original Wood Glue 1 gallon (3785 g)
Code 201031CartPrice € 32.90
Base price € 8.69 per kg
Titebond Translucent Wood Glue
Titebond Translucent Wood Glue
Titebond Translucent Wood Glue is designed for general household and woodworking projects. It provides a virtually invisible glue line and bonds stronger than the wood. A strong tack and fast speed of set helps reduce clamp time. When dry, this wood glue is unaffected by finishes and sands easily.

Also ideal for craft projects, Titebond Translucent is easy to use, non-toxic and cleans up with water. It is specifically designed for wood, particleboard, hardboard, leather, cloth and most other porous materials.

Physical Properties
Type: Polyvinyl acetate emulsion
State: Liquid
Dried Film: Translucent
Storage life: 24 months in tightly closed containers below 23°C.
Chalk temperature: Approximately 10°C
Application Guidelines
Application Temperature: Above 10°C
Open Assembly Time: 5 minutes (21°C./50%RH)
Total assembly time: 10-15 minutes (21°C./50%RH)
Minimum required spread: Approximately 5 square meter per liter
Required clamping pressure: Enough to bring joints tightly together (generally, 30-80 psi for HPL, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Method of Application: Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing applications.
Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
Limitations
Titebond Translucent Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue, or materials are below 10°C. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.
Caution Statement
No caution information is needed. Please refer to the Safety Data Sheet for further information.

Safety data sheet

Titebond Translucent Wood Glue 8oz (226 g)
Code 201039CartPrice € 5.90
Base price € 26.11 per kg
Titebond Polyurethane Liquid Glue
Titebond Polyurethane Liquid Glue
Titebond Polyurethane Glue is a breakthrough in adhesive technology. It is the only polyurethane glue to combine a long 30-minute working time with a short 45-minute clamp time. It is a versatile, professional-strength glue specifically formulated for multi-purpose applications.

In addition to its superior wood-to-wood performance, Titebond Polyurethane Glue is ideal for metals, ceramics, most plastics, HPL, Corian, stone and other porous/non-porous materials. It is ready-to-use, offers excellent sandability and is unaffected by finishes.

Physical Properties
Type: Polyurethane
State: Liquid
Dried Film: Yellow
Storage life: 12 months in tightly closed containers below 23°C.
Application Guidelines
Application Temperature: Above 10°C
Assembly Time After Glue Application: 25-30 minutes (21°C./50%RH)
Minimum required spread: Approximately 5 square meter per liter
Required clamping pressure: Enough to bring joints tightly together (generally, 30-80 psi for HPL, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Method of Application: Easily spread with a roller, spreader or brush. NOTE: This product cures by reaction with moisture. Changes in humidity, temperature and moisture content of the glued surfaces will affect open time and minimum clamp time. Maximum open time can be determined by excessive foam development in the adhesive. Minimum clamp time can be determined when squeeze out of adhesive becomes firm.
Cleanup: Mineral spirits while glue is wet. Scrape or sand off dried excess.
Limitations
Titebond Polyurethane Glue is not for structural applications or for use below the waterline. For ease of application, the glue, temperature and materials to be bonded should be above 10°C. Lower temperatures will cause the glue to thicken.
Caution Statement
EYE AND SKIN IRRITANT. POTENTIAL SKIN AND RESPIRATORY SENSITIZER. Contains isocyanate containing polymers. Contact causes eye irritation. Prolonged or repeated skin exposure may cause irritation and sensitization or allergic reaction. Contact may stain skin. Do not allow eye contact. Avoid prolonged or repeated contact with skin. In case of eye contact, flush immediately with plenty of water for at least 15 minutes and seek medical attention. For skin, wash thoroughly with soap and water. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.

Safety data sheet

Titebond Polyurethane Liquid Glue 4oz (113 g)
Code 201046CartPrice € 7.90
Base price € 69.91 per kg

Titebond Polyurethane Liquid Glue 8oz (226 g)
Code 201047CartPrice € 11.90
Base price € 52.65 per kg
Titebond Liquid Hide Glue
Titebond Liquid Hide Glue
Titebond Liquid Hide Glue is the first hide glue to be offered in a liquid, ready-to-use form. It requires no mixing, heating or stirring. Professional woodworkers use Titebond Liquid Hide for its long assembly time, exceptional strength and unique crackling effect on wood.

Titebond Liquid Hide provides superior creep-resistance, offers excellent sandability and is unaffected by finishes. Its sensitivity to moisture allows for easy disassembly of parts, a critical benefit in antique restoration or the repair of musical instruments.

Physical Properties
Type: Natural protein emulsion
State: Liquid
Dried Film: Translucent
Storage life: 24 months in tightly closed containers below 23°C.
Application Guidelines
Application Temperature: Above 10°C
Open Assembly Time: 10 minutes (21°C./50%RH)
Total assembly time: 20-30 minutes (21°C./50%RH)
Minimum required spread: Approximately 5 square meter per liter
Required clamping pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Method of Application: Can be applied by roller or dip spreader, pressurized oil cans, plastic applicators, brush or stick.
Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
Limitations
Titebond Liquid Hide Glue is not intended for exterior use or where moisture is likely. Not for structural or load bearing applications. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. KEEP FROM FREEZING.
Caution Statement
EYE IRRITANT. Contains ammonium rhodanate; dicyanodiamide. Contact with eye will cause irritation. Do not take internally. Not intended for use by children. If eye contact occurs, rinse with running water for at least 15 minutes. If ingested do not induce vomiting. Seek medical attention if eye irritation or gastric distress occurs. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.

Safety data sheet

Titebond Liquid Hide Glue 4oz (113 g)
Code 201072CartPrice € 5.90
Base price € 52.21 per kg

Titebond Liquid Hide Glue 8oz (226 g)
Code 201073CartPrice € 8.90
Base price € 39.38 per kg

Titebond Liquid Hide Glue 16oz (452 g)
Currently not in stock!
Code 201074Cart Price € 13.90
Base price € 30.75 per kg
Titebond Quick & Thick Wood Glue
Titebond Quick & Thick Wood Glue
Titebond Quick & Thick Multi-Surface Glue is the thickest, fastest-drying water-based glue available for use with porous and semi-porous materials. It is ideal for wood, pottery, ceramic, stone, glass, fabrics, leather and most craft-type materials.

Titebond Quick & Thick Multi-Surface Glue provides a strong initial tack and fast speed of set, yet allows realignment of working pieces. It also develops a bond stronger than the wood itself, dries clear and is unaffected by finishes.

Physical Properties
Type: Thixotropic polyvinyl acetate
State: High-viscosity liquid
Dried Film: Clear
Chalk temperature: Approximately 10°C
Storage life: 24 months in tightly closed containers below 23°C.
Application Guidelines
Application Temperature: Above 10°C
Open Assembly Time: 3-5 minutes (21°C./50%RH)
Total assembly time: 10-15 minutes (21°C./50%RH)
Minimum required spread: Approximately 5 square meter per liter
Required clamping pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Method of Application: Plastic bottles for fine applications; glue may also be spread with a roller, speader or brush.
Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.
Limitations
Titebond Quick & Thick Multi-Surface Glue is not recommended for exterior use or where moisture is likely. For exterior applications, use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Not recommended for photos, washable wearables, metals, plastics or rubber. Do not use when temperature, glue or materials are below 10°C. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Read SDS before use. For wood, sand glued area thoroughly before staining. Store at room temperature. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.
Caution Statement
No caution information is needed. Please refer to the Safety Data Sheet for further information.

Safety data sheet
Video

Titebond Quick & Thick Wood Glue 8oz (226 g)
Code 201084CartPrice € 5.90
Base price € 26.11 per kg

Read here what our colleague Anthony writes about Titebond glues.

You are here:   Homepage   →   Abrasives, Finishes, Glue   →   Titebond Wood Glue