Dieter Schmid's Fine Tools
Glue Bottle

GluBot and BabeBot Glue Bottles

The GluBot is a glue dispenser that doesn’t drip and doesn’t mess - a clean business! You can apply the glue exactly where you want it and nowhere else. You have a choice of tips for every type of glue application. You don’t necessarily have to tilt the bottle to get the glue out; it starts flowing when you press on the flexible plastic bottle. In this dual chamber system, the glue flows into the smaller side chamber from below so that you will always be dispensing fresh glue from the bottom of the bottle. When the job is finished, you close the bottle with a plastic cap that has an air-tight seal. That keeps your glue in a serviceable condition for a long time. To refill the Glubot you simply take off the larger wide-neck cap. The GluBot holds approx. 450 g glue, the smaller BabeBot, see bottom of this page, holds approx. 110 g glue.

GluBot 16oz (453 g) Glue Bottle
Includes: one wide tip (blade type), one fine tip (Yorker type) and 1 guide for placing a bead of glue along the centre of the edge of a board.
Capacity 453 g
Height 190 mm

Code 328700CartPrice € 9.90

The GluBot is practical and versatile:


Leimspender
Leimspender
Leimspender
Leimspender

Set of 5 wide tips (blade type) for GluBot 16 oz glue bottle
for fast application!

Code 328701CartPrice € 1.70

Set of 5 fine Tips (Yorker type) for GluBot 16oz glue bottle
for precise application!

Code 328702CartPrice € 1.70

Set of 5 guides for GluBot 16 oz glue bottle
The GluBot guide allows you to place a bead of glue along the centre of the edge of your boards. Designed for 3/4 inch (19 mm) material, it can be heated and adapted to other board thicknesses.

Code 328703CartPrice € 2.95

Lid and retaining ring for GluBot 16 oz glue bottle
Set consists of wide-neck lid and smaller retaining ring.

Code 328704CartPrice € 1.70

Set of 5 red caps for GluBot 16 oz glue bottle
Flexible plastic for airtight closure, retaining strip stops cap getting lost.

Code 328705CartPrice € 1.70

BabeBot 4 oz (113 g) Glue Bottle
If most of your gluing jobs are small ones, then this bottle is the right choice. Includes: one wide tip (blade type), one fine tip (Yorker type).

Note: The fine tip is packed inside the bottle. Remember to take it out before you fill the bottle with glue!

Capacity 113 g
Height 125 mm

Code 328710CartPrice € 7.90

Set of 5 wide tips (blade type) for BabeBot 4 oz glue bottle
for fast application!

Code 328711CartPrice € 1.70

Set of 5 fine tips (Yorker type) for BabeBot 4 oz glue bottle
for precise application!

Code 328712CartPrice € 1.70

Lid and retaining ring for BabeBot 4oz glue bottle
Set consists of wide-neck lid and smaller retaining ring.

Code 328714CartPrice € 1.70

Set of 5 red caps for BabeBot 4oz glue bottle
Spare caps in rigid plastic without retaining strip.

Code 328715CartPrice € 1.70
You are here:   Homepage   →   Abrasives, Finishes, Glue   →   GluBot and BabeBot Glue Bottles