High pressure glue injector
20 ml with 3 different tips
Available, delivery time: 2-3 days
Product information
With this glue syringe, you can press glue with high pressure into cracks or loose wood joints. If it’s difficult to disassemble, for example, a wobbly chair for gluing, you can instead drill a small hole in the area of the glue joint and inject the glue into the wood joint through this hole.
Two brass tips with nozzle diameters of 1.6 mm and 0.8 mm allow for more or less flow when applying the glue, depending on your needs.
With the supplied stainless steel attachment, glue can be easily drawn from a container: Remove the brass tip, screw on the stainless steel attachment, insert the tip into the glue pot, draw in glue by pulling the plunger back, then unscrew the stainless steel attachment and screw on the glue tip. This way, the cylinder remains clean.
Alternatively, you can also fill the glue by unscrewing the rear black cap, pulling out the plunger, and then filling in the glue.
| Features | |
|---|---|
| Capacity | 20 ml |
| Total length with plunger extended | 245 mm |
| Total length with plunger retracted | 170 mm |
| Cylinder diameter | 24.5 mm |
| Cylinder material | Plastic |
Login