Set of
6 Japanese Chisels 6-9-12-18-24-30 mm in Canvas-Tool Roll KOSHIMITSU
Available, delivery time: 1-3 days
Product information
The blacksmith Yasushi Hanyo continues the brand KOSHIMITSU after Mr. Matsumura, who had supplied us for over 20 years, retired. Yasushi Hanyo operates practically in the neighborhood, in Yoita, Niigata Province. Yasushi Hanyo is a highly experienced blacksmith and produces chisels of the highest quality and finesse. The chisels are hand-forged from white paper steel, a particularly fine-grained carbon steel, allowing you to achieve an extreme sharpness when sharpening and honing, comparable to only a few other steels.
The chisel is slightly cranked towards the handle. The advantage is that you can chisel deeper with precision than the length of the chisel suggests. However, this requires flat mirror side edges even in the transition area to the shaft.
The steel ring over the red oak handle is hammered so that the end of the handle protrudes approximately 1 – 2 mm over the ring, ensuring that the hammer only strikes wood when hitting.
These nomi are hand-forged and hand-ground, which may result in slight deviations in width and length. Like all Japanese chisels, they must be sharpened and honed before first use.
Handle diameter ranges from 19 mm on the 3 mm wide chisel to 25 mm on the 42 mm wide chisel. The mirror side of all sizes is equipped with a single hollow grind.
| Features | |
|---|---|
| Bevel angle | approx. 30° |
| Total length | approx. 22 cm |
| Hardness | 64 HRC |
| Blade length | approx. 68 mm |
| Material | Hitachi Yasuki Hagane No. 2, White Paper Steel |
| Chisel width | 24 mm, 6 mm, 30 mm, 9 mm, 18 mm, 12 mm |
| Packaging | Canvas bag |
Login
Also interesting
Available, delivery time: 1-3 days
Available, delivery time: 1-3 days