Flushing Chisel Blade 1/2 inch (12.7 mm) PMV-11 Steel
VERITAS
Available, delivery time: 2-3 days
Product information
Veritas developed these leveling chisels inspired by historical model maker chisels from their collection. They are not only suitable for trimming joints and inlays flush, but also allow you to work flat surfaces up to adjacent components, which is often not possible with planes. While you push the chisel forward with one hand on the handle, the other hand guides the blade. This allows you to comfortably guide the chisel and take controlled fine shavings.
The blades made of PM-V11 steel are very thin. This makes the tool lighter but also brings your fingers closer to the workpiece, allowing you to feel it well.
The connection between the handle and the blade is threaded, differing from the conical plug connection of the historical original. With this thread, you can quickly and securely attach the heat-treated maple handle to the blade and easily detach it if you wish to change the blade.
The blades are available in widths of 12.7 mm (1/2 inch), 19.05 mm (3/4 inch), 25.4 mm (1 inch), and 38.1 mm (1-1/2 inch) and can also be purchased individually. You really only need one handle unless you have the unique ability to use more than one chisel simultaneously. The handle is also available separately.
The chisel is approximately 146 mm long and 3.2 mm thick.
With the handle, the chisel is approximately 299 mm long.
Made in Canada!
| Features | |
|---|---|
| Origin | Canada |
| Length mm | 299 |
| Material | PM-V11 Steel |
Login
Fits for
Available, delivery time: 2-3 days