Dieter Schmid's Fine Tools
ZOBO System 2 Accessories

ZOBO System 2 Accessories

The ZOBO drilling system is uniquely versatile with a very large number of available drill bit diameters - from 10 mm to 65 mm in 1 mm increments - together with extensions, centring points, pilot drills and depth collars. Moreover, several extensions can be screwed together for deep-hole drilling applications.
ZOBO drilling system - more information

Centring point for ZOBO drill WD C 10-50 mm and WD HW 10-30 mm

  • Diameter 2.5 mm
  • Working length 3.5 mm
  • Total length 25 mm

Code 334200CartPrice € 3.10

Centring point for ZOBO drill WD C 10-50 mm and WD HW 10-30 mm

  • Diameter 2.5 mm
  • Working length 7.5 mm
  • Total length 28 mm

Code 334201CartPrice € 3.50

Centring point for ZOBO drill WD C 10-50 mm and WD HW 10-30 mm

  • Diameter 2.5 mm
  • Working length 14.5 mm
  • Total length 34 mm

Code 334202CartPrice € 3.90

Centring point for ZOBO drill WD C 10-50 mm and WD HW 10-30 mm

  • Diameter 2.5 mm
  • Working length 19 mm
  • Total length 38 mm

Code 334203CartPrice € 4.90

Centring point for ZOBO drill WD C 51-65 mm and WD HW 31-65 mm

  • Diameter 3.5 mm
  • Working length 4 mm
  • Total length 28.5 mm

Code 334204CartPrice € 3.90

Centring point for ZOBO drill WD C 51-65 mm und WD HW 31-65 mm

  • Diameter 3.5 mm
  • Working length 19 mm
  • Total length 39 mm

Code 334205CartPrice € 5.90

Pilot drill for ZOBO drill WD C 10-50 mm and WD HW 10-30 mm

  • Diameter 3 mm
  • Shaft diameter 2.5 mm
  • Working length 30 mm
  • Total length 51 mm

Code 334206CartPrice € 9.50

Pilot drill for ZOBO drill WD C 51-65 mm und WD HW 31-65 mm

  • Diameter 3.5 mm
  • Shaft diameter 3.5 mm
  • Working length 43 mm
  • Total length 70 mm

Code 334207CartPrice € 12.90

Drift punch for ZOBO centring point and pilot drill
Tap this punch with a hammer to loosen centring points and pilot drills.
Total length 100 mm

Code 334210CartPrice € 5.80

Shank diameter reduction from 9 mm to 8 mm for ZOBO drills
This reduction is screwed onto the shank for use with drill holders that can only accommodate 8 mm shank diameters. The reduction also serves as drill extension. The effective drill length is increased by 60 mm.
Total length 85 mm
Diameter 12 mm

Code 334212CartPrice € 63.90

Shank diameter reduction from 12 mm to 10 mm for ZOBO drills
This reduction is screwed onto the shank for use with drill holders that can only accommodate 10 mm shank diameters. The reduction also serves as drill extension. The effective drill length is increased by 60 mm.
Total length 85 mm
Diameter 15 mm

Code 334213CartPrice € 64.90

ZOBO 150 mm extension for hand drill

  • Diameter 13 mm
  • Shaft diameter 9 mm
  • For drills with shank diameter 9 mm
  • Drill length increased by 113 mm

Code 334220CartPrice € 47.00

ZOBO 400 mm extension for hand drill

  • Diameter 13 mm
  • Shaft diameter 9 mm
  • For drills with shank diameter 9 mm
  • Drill length increased by 348 mm

Code 334221CartPrice € 73.00

ZOBO 150 mm extension for hand drill

  • Diameter 16 mm
  • Shaft diameter 12 mm
  • For drills with shank diameter 12 mm
  • Drill length increased by 113 mm

Code 334222CartPrice € 48.00

ZOBO 400 mm extension for hand drill

  • Diameter 16 mm
  • Shaft diameter 12 mm
  • For drills with shank diameter 12 mm
  • Drill length increased by 348 mm

Code 334223CartPrice € 75.00

ZOBO 150 mm extension for stationary drilling machine
Extensions for stationary drilling machines are hardened, straightened and precision ground for high run-out accuracy.

  • Diameter 16 mm
  • Shaft diameter 12 mm
  • For drills with shank diameter 9 mm !!
  • Drill length increased by 113 mm

Code 334224CartPrice € 75.00

ZOBO 150 mm extension for stationary drilling machine
Extensions for stationary drilling machines are hardened, straightened and precision ground for high run-out accuracy.

  • Diameter 16 mm
  • Shaft diameter 12 mm
  • For drills with shank diameter 12 mm !!
  • Drill length increased by 113 mm

Code 334225CartPrice € 75.00

ZOBO shank L = 55 mm D = 12 mm
Spare shank for large chromium steel and tungsten carbide 51-65 mm drills.

Code 334227CartPrice € 52.00

Special spanner for removing ZOBO drills from extensions
An open-end spanner or adjustable spanner will do just as well.

Code 334228CartPrice € 37.00

Depth collar for ZOBO drill D = 10-25 mm and shank = 9 mm

  • For drill diameter 10-25 mm
  • For drill shank diameter 9 mm
  • Outside diameter 33 mm
  • Length 44 mm (the amount by which the hole depth is reduced)

Code 334230CartPrice € 55.00

Depth collar for ZOBO drill D = 10-30 mm and shank = 9 mm

  • For drill diameter 10-30 mm
  • For drill shank diameter 9 mm
  • Outside diameter 48.5 mm
  • Length 57.5 mm (the amount by which the hole depth is reduced)

Code 334231CartPrice € 63.00

Depth collar for ZOBO drill D = 31-40 mm and shank = 12 mm

  • For drill diameter 31-40 mm
  • For drill shank diameter 12 mm
  • Outside diameter 48.5 mm
  • Length 57.5 mm (the amount by which the hole depth is reduced)

Code 334232CartPrice € 65.00

Depth collar for ZOBO drill D = 31-50 mm and shank = 12 mm

  • For drill diameter 31-50 mm
  • For drill shank diameter 12 mm
  • Outside diameter 58.5 mm
  • Length 62 mm (the amount by which the hole depth is reduced)

Code 334233CartPrice € 72.00

Depth collar for ZOBO drill D = 51-65 mm and shank = 16 mm Important note: ZOBO drills 51 to 65 mm have a stepped shank. The part near the drill head has a diameter of 16 mm, the part that is held by the drilling machine has a diameter of 12 mm. Seeing this depth collar can only be screwed onto a 16 mm shank, this leaves a hole depth of just 10 mm. A meaningful use of this depth collar is, therefore, only possible in conjunction with an extension no. 334225 for stationary drilling machines. You can obviously use this item with hand drills. You can also screw several of these extensions together. Extensions for hand drills are not suitable because they are not precision ground.

  • For drill diameter 51-65 mm
  • For drill shank diameter16 mm
  • Outside diameter 75.5 mm
  • Length 58 mm (the amount by which the hole depth is reduced)

Code 334234CartPrice € 125.00
You are here:   Homepage   →   Drilling   →   Forstner Bits   →   ZOBO System 2 Accessories