Dieter Schmid's Fine Tools
PM Roughing Out Gouges, PM Spindle Gouges, PM Bowl Gouges

PM Roughing Out Gouges, PM Spindle Gouges, PM Bowl Gouges

Crowns exclusive new range of Pro-PM turning tools are made from an advanced Powder Metal, the molten steel has been compressed and sintered giving these Pro-PM turning tools a cutting edge which lasts up to four/five times that of a conventional High Speed Steel tool. The chisels are hardened to between 66° and 68° Rockwell, enabling the tools to have a vastly superior wear resistance, excellent grinability, superior toughness, a high working hardness and a high retention of hardness. The ergonomically designed stained black ash handles fitted to these tools make the finished chisels unbeatable. Made by Crown in Sheffield.



Pro-PM Roughing Out Gouge The ideal tool for preliminary work to produce a round shape from square edge spindle stock. Made for fast removing of shavings!
Width inside 19 mm
Width outside 30 mm
Black Ash handle 317 mm
Total length 470 mm
Code 331000CartPrice € 109.00


Pro-PM Spindle Gouge Shallow flute for general work
Width outside 6 mm
Black Ash handle 317 mm
Total length 480 mm
Code 331001CartPrice € 43.90

Pro-PM Spindle Gouge
Width outside a bit less than 10 mm
Black Ash handle 317 mm
Total length 480 mm
Code 331002CartPrice € 49.90

Pro-PM Spindle Gouge
Width outside a bit less than 13 mm
Black Ash handle 317 mm
Total length 480 mm
Code 331004CartPrice € 53.90


Pro-PM Bowl Gouge Width inside 6 mm
Width outside 10 mm
Black Ash handle 406 mm
Total length 660 mm
Code 331010CartPrice € 69.90

Pro-PM Bowl Gouge
Width inside a bit less than 10 mm
Width outside a bit less than 14 mm
Black Ash handle 406 mm
Total length 660 mm
Code 331011CartPrice € 72.90

Pro-PM Short Bowl Gouge
Width inside a bit less than 10 mm
Width outside a bit less than 14 mm
Black Ash handle 317 mm
Total length 490 mm
Code 331013CartPrice € 59.90

Pro-PM Bowl Gouge
Width inside a bit less than 13 mm
Width outside a bit less than 16 mm
Black Ash handle 406 mm
Total length 660 mm
Code 331014CartPrice € 99.00

Pro-PM Bowl Gouge
Width inside 19 mm
Width outside a bit less than 23 mm
Black Ash handle 406 mm
Total length 660 mm
Code 331016CartPrice € 179.00

Pro-PM Bowl Gouge
Width inside 19 mm
Width outside a bit less than 26 mm
Black Ash handle 406 mm
Total length 660 mm
Code 331017CartPrice € 179.00


Pro-PM ELLSWORTH Gouge The unique tip design of this gouge will allow the turner to make rough cuts and finish cuts on both the exterior and interior of a bowl. In most cases this will be the only tool needed to finish the work. Comes with instruction leaflet!
Width inside 9 mm
Width outside gut 13 mm
Black Ash handle 406 mm
Total length 660 mm
Code 331012CartPrice € 99.90

Pro-PM ELLSWORTH Gouge
Width inside a bit less than 13 mm
Width outside a bit less than 17 mm
Black Ash handle 406 mm
Total length 660 mm
Code 331015CartPrice € 135.00
You are here:   Homepage   →   Turning Tools   →   PM Roughing Out Gouges, PM Spindle Gouges, PM Bowl Gouges