Dieter Schmid's Fine Tools
Starrett Steel Rules

Starrett Steel Rules

Brief general information on steel rules

Steel rules made by STARRETT in the USA are made from high-quality steel to the highest standards of precision. STARRETT machine-divided rules provide uniformity of line width and depth. Graduations are generally deeper than in cheaper, photo-engraved rules and will last longer. The numbering size is distinctive and more readable than in ordinary rules. The rules are satin-chrome finished for easier reading and rust resistance.

STARRETT Steel Rule

This steel rule is spring tempered with satin chrome finish for better readability. Graduations on four edges. Limited flexibility due to the thickness of 1.2 mm.

STARRETT Steel Rule

1st side: reading from left to right
2nd side: reading from right to left

Length Width/Thickness Graduation 1st side Graduation 2nd side CodePrice
150 mm 19 x 1.2 mm mm and 1/2 mm
left → right
mm and 1/2 mm
right → left
Code 306440CartPrice € 20.90
300 mm 25.4 x 1.2 mm mm and 1/2 mm
left → right
mm and 1/2 mm
right → left
Code 306450CartPrice € 43.90
500 mm 29 x 1.2 mm mm and 1/2 mm
left → right
mm and 1/2 mm
right → left
Code 306451CartPrice € 68.90
1000 mm 32 x 1.2 mm mm and 1/2 mm
left → right
mm and 1/2 mm
right → left
Code 306452CartPrice € 169.00
STARRETT Steel Rule with End Graduation This steel rule is spring tempered with satin chrome finish for better readability. Graduations on four edges plus end graduations which are useful for measuring depth, width of shoulders, recesses.
STARRETT Steel Rule with End Graduation
1st side: reading from left to right with End Graduation


Length Width/Thickness Graduation 1st side Graduation 2nd side CodePrice
150 mm 19 x 1.2 mm mm and 1/2 mm
left → right
additionally mm at the ends
mm and 1/2 mm
right → left
Code 306441CartPrice € 24.90
STARRETT Narrow Steel Rule This narrow steel rule is spring tempered with satin chrome finish for better readability. Graduations on two edges.
STARRETT Narrow Steel Rule 1st side: mm-reading from left to right
2nd side: mm and 1/2 mm from left to right

Length Width/Thickness Graduation 1st side Graduation 2nd side CodePrice
150 mm 4.8 x 1.2 mm mm
left → right
mm and 1/2 mm
left → right
Code 306442CartPrice € 15.90
STARRETT full flexible Steel Rule This steel rule is full flexible with satin chrome finish for better readability. Graduations on three edges.
STARRETT full flexible Steel Rule
1st side: mm and 1/2 mm from left to right

2nd side: mm and 1/2 mm from left to right - only on one edge!

Length Width/Thickness Graduation 1st side Graduation 2nd side CodePrice
150 mm 12.7 x 0.4 mm mm and 1/2 mm
left → right
1/2 mm
left → right
Code 306445CartPrice € 17.90
300 mm 12.7 x 0.4 mm mm and 1/2 mm
left → right
1/2 mm
left → right
Code 306446CartPrice € 36.50
STARRETT Key Seat Clamps

STARRETT Key Seat Clamps These key seat clamps convert steel rules, combination square blades and straight edges into key seat rules for laying out keyways and scribing parallel lines on round work. They can be easily attached or removed. Made of steel, case hardened, and accurately ground, size 25.4 x 11 mm (1 inch x 7/16 inch), slot for steel rule 2.8 mm. Made by Starrett.
Steel rule NOT included!
Code 306453CartPrice € 44.90
VERITAS Ruler Stop

VERITAS Ruler Stop The Veritas ruler stop increases the usefulness of a metal ruler by providing a solid reference point. It is ideal for setting saw fences, repeat cuts, etc.

To use, slide the stop over the ruler end and tighten it at the desired position. The notched post at the tip of the brass adjustment screw allows even the thinnest rulers to be clamped securely; it will not mar the ruler edge. Repositioning is fast and easy. The stop's anodized aluminum body is contoured to fit comfortably between thumb and forefinger, with raised ridges for a better grip.

Accommodates rulers from 7/8 inch to 1-1/8 inch (22.2 mm to 28.5 mm) wide and up to 0.05 inch (1.2 mm) thick, the typical dimensions of rulers in the 12 inch to 24 inch length range. At 1 inch wide by about 2-1/4 (25.4 x 57 mm) in long (including the adjustment screw), this tool is as compact as it is useful. Please check the size of your ruler before ordering! Among the rulers we offer this ruler stop fits only in the 300 mm long Starrett nr. 306450 and the 300 mm long Shinwa nr. 310301.
Steel rule NOT included.
Code 307843CartPrice € 15.50
You are here:   Homepage   →   Measuring and Marking   →   Rulers, Measering Tapes   →   Starrett Steel Rules