Dieter Schmid's Fine Tools
JESSEM Clear Cut TS Stock Guides - for Table Saw

JESSEM Clear Cut TS Stock Guides - for Table Saw

JESSEM Clear Cut TS Stock Guides - for Table Saw

Nothing on the market can provide you with the safety and precision while holding your stock and preventing kickback without certain limitations. Now there is an option for your table saw with no limitations.

JESSEM Clear Cut TS Stock Guides

The roller arm holds your work under pressure to ensure your work is hold firmly in place. The angle of the arm causes the roller to hold with more force if the wood tries to move against the derection of feed.

Set up is fast and easy. The stock guides can also pivot out of the way and tuck behind the surface of your fence when not in use.

With Clear Cut TS Stock Guides you won't have to struggle to hold wide boards or large panels as you try to feed it through your saw blade. The guides pull your stock securely into position and hold your work tight to the fence.

You will achieve safer, smoother, and more precise cuts as your work is always held in position.

Comes with printed mounting instructions.

Picture of box content

guide rollers

JESSEM Clear Cut TS Stock Guides - for Table Saw

The unique guide rollers on the stock guides are mounted on a 5 degree angle effectively steering your stock toward the fence. To help prevent kickback, each roller is mounted on a one way needle roller bearing.

Code 332035CartPrice € 289.00

ts-stock-guides

Clear Cut TS Stock Guides mount to most commercially available table saw fences and with the use of Jessem's t-track you have complete adjustability of your stock guides.


Review and videos

Mounting Kit for Incra Fences

Recommended when you want to mount the Clear Cut TS Stock Guides on a Incra fence.

When you have the Incra LSTS Positioner System on your table saw this creates a slight problem with the Jessem T Track rail. The rail is wider than the top of the fence and the Positioner arm is higher than the top of fence. The Incra Mounting Kit from Jessem solves this problem. These are 4 aluminium blocks that lift the T Track rail high enough for in to be securely mounted to the Incra fence.

Code 332036CartPrice € 29.90
T-Track
JESSEM T-Track

These 30 inch (762 mm) long and 2 inch (50.8 mm) wide mounting tracks can also be purchased individually in case you have several fences in use. Mounting screws are included.

Code 332037CartPrice € 39.50
You are here:   Homepage   →   Power Tool Equipment   →   JESSEM Clear Cut TS Stock Guides - for Table Saw