March 28, 2025
Additional information
Operating instructions for STAR-M circular cutter No. 36 HSS and No. 36T HM
Wood threads - made with our wood thread cutters
These threads are not yet sanded; they were photographed after cutting the threads without prior further treatment.
These threads are not yet sanded; they were photographed after cutting the threads without prior further treatment.
If you are cutting thicker material than 25 mm, approach from both sides. Do not drill all the way through from the first side. This prevents tear-out. Then use the through guide hole to drill from the other side.

Beech, left 13 mm, middle 16 mm, right 25 mm

Beech, left 32 mm, right 62 mm
