Inlay Bushing 1/4 inch
VERITAS
Available, delivery time: 2-3 days
Product information
An inlay bushing, teamed up with the corresponding template guide, allows you to make an inlay plug and mating recess from the same template. The inlay bushing positions the bit to cut the inlay recess (or negative), and the template guide positions the bit to cut the plug (positive). The difference between the outside diameter of the inlay bushing and the template guide creates a common amount of offset to ensure a snug fit.
The VERITAS inlay bushings are made of solid brass and are sized specifically for use with the Veritas Template Guides. The 1/4 inch inlay bushing has a 1/2 inch outside diameter and is for use with a 1/8 inch bit. It requires the 1/4 inch template guide. The 3/8 inch inlay bushing has a 7/8 inch outside diameter and is for use with a 1/4 inch bit. It requires the 3/8 inch template guide.
Attached using a 1 3/16 inch threaded ring nut. Sold separately, see at the bottom of this page.
Made in Canada
| Features | |
|---|---|
| Outer Diameter | 1/2 inch |
| Recommended Cutter Ø | 3 mm, 1/8 inch |
Login