Bench Chisel PM-V11-Steel 1/8 inch (3.2 mm)
VERITAS
Available, delivery time: 2-3 days
Product information
Veritas Chisels made from PM-V11 Steel
These chisels are among the first cutting tools made from Veritas' groundbreaking PM-V11 steel (hardness RC 61-63). The fine structure of this steel makes it extremely durable, allowing it to withstand the toughest demands of chiseling without the edge breaking out or bending, as would happen with other tool steels. This is true even at very small bevel angles of up to 20°. At the same time, PM-V11 is highly wear-resistant, meaning the edges can typically be used twice as long as those made from A2 steel before needing to be sharpened again. Despite its high durability, PM-V11 can be easily sharpened with common abrasives, such as Japanese water stones, as easily as A2 steel.
The blade tapers from the neck to the edge, making it stiffer and more resilient. The sides are parallel and have bevels (to the back), which provide maximum maneuverability and minimal friction when working into angled corners (such as dovetails) or tight recesses. To ensure that the back is both flat and smooth, Veritas grinds each chisel completely to a maximum flatness deviation of 0.0127 mm (0.0005 inch).
The handle is made from Canadian maple (Hard Maple). Before processing, it is „baked” in an oven at high temperatures. Nearly all moisture is removed, and the sugar present in the wood is caramelized. This gives the wood a rich, dark color and makes it significantly more resistant to moisture penetration, preventing shrinking or swelling. The handle is designed to fit well in the hand and has small flats parallel to the blade to provide tactile cues for the correct finger positioning. The end is domed to prevent chipping from oblique blows with the mallet.
| Properties | |
|---|---|
| Iron Width | 1/8 inch (3.2 mm) |
| Hardness | RC 61-63 |
| Handle Material | Canadian Maple (Hard Maple) |
| Material | PM-V11 Steel |
| Abrasive | Japanese Water Stones |
Login