Two-Speed Hand Drill B13-2RLE
DUSS
FRIEDRICH DUSS
€559.90*
Available, delivery time: 2-3 days
Product number: 300604
Product information
This drill is handy and flexible with high torque. It demonstrates its power especially when drilling large diameters. It is designed to be so stable that it can also drive in large screws and mix tough materials. It easily handles rust removal work with a brush, as well as drilling with a hole saw.
Weight with drill chuck, handle, and cable approximately 2.8 kg
Power consumption 650 W
Drill stand NOT included!
Standard equipment included:
2-speed drill B 13/2 RLE
Quick-action chuck with locking screw
Side handle
Drill depth stop
Cable with plug
- High torque (in 1st gear 45 Nm)
- High speed in 2nd gear
- Electronic speed control with full-wave control electronics
- Pre-selectable speed via adjustment wheel
- Right-left rotation switch conveniently arranged with switch lock
- Solid magnesium gearbox housing
- Robust, large-dimensioned spindle bearing
| Features | |
|---|---|
| Drilling diameter in sand-lime brick and masonry with hollow drill bit (1st gear) | 66 mm |
| Drilling diameter in lightweight materials (hole saw) (1st gear) | 105 mm |
| Drilling diameter in lightweight materials (hole saw) (2nd gear) | 50 mm |
| Drilling diameter in steel (1st gear) | 16 mm |
| Drilling diameter in steel (2nd gear) | 8 mm |
| Drilling diameter in softwood (1st gear) | 40 mm |
| Drilling diameter in softwood (2nd gear) | 20 mm |
| Drill spindle thread | 1/2"-20 UNF |
| Speed under load (RPM) (1st gear) | 0-450 |
| Speed under load (RPM) (2nd gear) | 0-1550 |
| Fixed torque (1st gear) | 45 Nm |
| Weight | 2.8 kg |
| Power consumption | 650 W |
| Rated input power | 650 Watts |
| Pure machine weight | 1.9 kg |
| Screws up to | Ø 12 mm |
| Chuck clamping range | Ø 1.5-13 mm |
| Clamping neck Ø | 43 mm |
Login