Plug Cutter
8 mm and Countersink Drill 3-8 mm
Available, delivery time: 2-3 days
Product information
Very well suited for filling in broken branches or repairing wood damage. Make your own cross-grain dowels with the wood type of your choice!
Important: For the disc cutter, you must use a table or drill press and clamp the workpiece! The step drill bit can also be used freehand. However, if the drill tip is removed, for example, when patching branches in thinner boards, a drill stand should also be used as with the disc cutter.
The disc cutter can also be used as a tenon cutter for small dowels up to approximately 25 mm in length. We have had good experiences with larch in end grain.
Particularly suitable for users who do not produce large quantities but do not want to miss out on the advantage of their own dowels or cross-grain dowels.
All drills have a hex shank of 6.35 mm (1/4 in.)
Quality product from Japan
| Properties | |
|---|---|
| Total length | 75 mm |
| Usable length | 25 mm |
| Disc diameter or dowel diameter | 8 mm |
| Pilot drill diameter | 3 mm |
Login