Plunging Beading Bit
TCT D=8mm B=10mm L=50mm R=3mm S=8mm KLEIN
€30.90*
Available, delivery time: 2-3 days
Product number: 360527
Product information
**Unlike the roundover bit, the quarter-round bit does not have one edge flush, but both edges are sharply defined. The plunge quarter-round bit also cuts on the underside.
These quarter-round bits have an extra narrow base cutting edge.
The quarter-round bits from Sistemi Klein are carbide-tipped (HM).
| Properties | |
|---|---|
| Diameter D | 8 mm |
| Diameter of Base Cutting Edge | 2.2 mm |
| Total Length L | 50 mm |
| Material | Carbide (HM) |
| Radius R | 3 mm |
| Shank Diameter S | 8 mm |
| Cutting Length B | 10 mm |
Login