Kunos Object Oil by Livos

• Application area: Solid woods for indoor use, e.g. furniture, window sills, and floors. Suitable for OSB. Conditioned for multiplex and veneers, not suitable for plywood, etc. Not for cabinet interior parts.
• Properties: Transparent, satin-gloss, water-resistant according to DIN 68 861, part 1, open-pored. Surface film after 2nd - 3rd application. According to DIN 53 160, saliva and sweat resistant. Suitable for toys according to DIN EN 71, part 3.
• Full declaration: Linseed oil, linseed oil stand oil natural resin ester, linseed oil wood oil stand oil, natural resin glycerin ester, linseed oil stand oil, orange oil, isoaliphates, silica, micronized wax, and lead-free drying agents.
• Substrate preparation: Wood must be dry (wood moisture below 12%), firm, absorbent, sanded stepwise to a fine finish, clean, resin and dust-free. For coarse-pored woods, e.g. oak, ash, sweet chestnut, hornbeam, robinia, or mahogany, carefully brush out the pores. Furniture should be sanded stepwise to 240 grit, except for oak 180 grit. Floors should be sanded stepwise to 180 grit.
• Application: By brushing, rolling (short-pile velour), spraying, dipping, rolling, pad application, or with a single-disc machine at temperatures above 12°C.
• Drying time: At 23°C and 50% relative humidity, first coat 12 hours, further coats 24 hours. Final hardness reached after 4 weeks.
• Consumption according to manufacturer’s specifications: First coat (undiluted): 1 l is sufficient for approx. 22 m², i.e. 45 ml/m². Second coat is sufficient for approx. 88 m²/l, i.e. 11 ml/m². Third coat is sufficient for approx. 295 m²/l, i.e. 4 ml/m². Depending on the absorbency and condition of the substrate, significantly less or more may be required. Test application!
  
• Storage: Cool, dry. Unopened, at least 3 years shelf life. Transfer opened containers into smaller containers.
• Disposal: According to local regulatory requirements. Dried product residues can be disposed of as normal household waste.
• Additional notes: Skin formation possible in opened containers, remove before use. Test application. For wood not saturated with KUNOS Object Oil No. 241 and inadequately sanded wood, as well as on oak, for example, with insufficient wetting of the early wood pores, stains and discoloration from water may occur. Incompatibilities, e.g. with sea pine, sweet chestnut, or tannin or dye-containing, sanded, stripped, pre-treated, or stained woods, may cause drying delays or discoloration within a week.
• Safety notes: Working materials soaked with KUNOS Object Oil No. 241, such as cleaning rags, polishing pads, sponges, sanding dust, etc., with not fully dried oil should be stored airtight in metal containers or in water and disposed of, as there is a risk of self-ignition due to the vegetable oil content.