Kataba Tatebiki for Rip Cut Blade
360 mm BESSHOTARO
Available, delivery time: 2-3 days
Product information
A classic Tatebiki for rip cuts! The blade is very wide and should be guided cleanly at the start of the cut, as the width of the blade makes it impossible to correct the cutting direction afterwards. If you manage this, you will be rewarded with a cut free of deviations. Through a clever balancing of the blade thickness, thinner at the front than at the back, the friction is significantly reduced during the pulling cut, which leads to less force being required. The different tooth spacing, with smaller teeth at the beginning of the cut and larger ones at the end, also reduces the risk of rattling and optimizes performance. BESSHOTARO is the top brand of the manufacturer HISHIKA in Miki, Japan.
| Properties | |
|---|---|
| Blade width | 95 mm, 130 mm |
| Blade thickness at the back (rear) | 0.8 mm |
| Blade thickness at the back (front) | 0.4 mm |
| Blade thickness at the teeth (rear) | 1.0 mm |
| Blade thickness at the teeth (front) | 0.7 mm |
| Blade length | 360 mm |
| Total length | 850 mm |
| Weight | approx. 400 g |
| Shaft thickness | 1.6 mm |
| Kerf width | approx. 1.5 mm |
| Tooth pitch (rear) | 4 mm (6.3 TPI) |
| Tooth pitch (front) | 7 mm (3.6 TPI) |
Login