Insert Trimming Cutters with Ball Bearing D=19mm B=30mm L=70mm Z=2 S=12mm

KLEIN

€66.51* €73.90*

You save €7.39!

Prices incl. VAT plus shipping costs

Cutting Length B

30 mm

50 mm

Shank diameter S

8 mm

12 mm

Product number: 361165

Product information

The insert flush trim cutters on this page are suitable for all types of wood and wood-based materials. The replaceable knives are made of carbide. Manufactured by Sistemi Klein in Pesaro, Italy.

Note: A Torx T15 flag key is included for changing the inserts.

Properties
Diameter D	19 mm
Cutting length B	30 mm
Total length L	70 mm
Shank diameter S	12 mm
Number of cutting edges	2
Carbide grade	HC05

Note: while it is possible to resharpen the indexable inserts on a diamond sharpening stone, they will naturally lose their inherent advantages: dimensional accuracy and the associated repeatability of the cut.

Another note: Due to their design, the imbalance in indexable insert cutters is somewhat greater than in standard cutters. All quality manufacturers of indexable insert cutters, including Sistemi Klein, succeed in minimizing this so that it usually does not become noticeable in practical everyday use. You can make the best contribution by using only quality routers from well-known manufacturers that have good bearings installed and by not choosing a router motor that is too small.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

I forgot my password. Customers of our previous shop should also use this function once to have a new password sent to them.

No reviews found. Share your insights with others.

Spare Parts

10% Discount

Ball Bearing d=8mm D=19mm B=6mm

€2.25* €2.50*

Prices incl. VAT plus shipping costs

Available, delivery time: 1-3 businessdays within Germany

10% Discount

New

Insert Knife L=30mm B=12mm C=1.5mm Angle=35° A=14mm KLEIN

€4.23* €4.70*

Prices incl. VAT plus shipping costs

Available, delivery time: 1-3 businessdays within Germany

10% Discount

Set of 4 Repl. Screws Torx T15 for Rabbetting Cutter Head KLEIN

€11.61* €12.90*

Prices incl. VAT plus shipping costs

Available, delivery time: 1-3 businessdays within Germany

10% Discount

Allen Key Torx T15 for Rabbetting Cutter Head KLEIN

€4.14* €4.60*

Prices incl. VAT plus shipping costs

Available, delivery time: 1-3 businessdays within Germany

Insert Trimming Cutters with Ball Bearing D=19mm B=30mm L=70mm Z=2 S=12mm KLEIN

Product information

Login

Insert Trimming Cutters with Ball Bearing D=19mm B=30mm L=70mm Z=2 S=12mm

KLEIN