Extension 10mm/130 mm for Bormax 22-54 mm and Bormax3 Cabide tipped
18 - 50 mm FAMAG
10% Discount
€26.46*
€29.40*
You save €2.94!
Available, delivery time: 1-3 businessdays within Germany
Product number: 304543
Product information
If the 57 mm usable length of the Bormax drills is not sufficient for your needs, you can drill deeper holes with these extensions. Also suitable for all other drills (pay attention to the minimum diameter!) with an 8 mm, 10 mm, or 13 mm shank. Equipped with 4 clamping screws for secure tool holding (2.5 mm hex key required)! Note the different shank sizes for Bormax and Bohrmax3 drills even if the diameter is the same!
| Properties | |
|---|---|
| Outer Diameter | 16 |
| For Drill Bits with Shank Diameter | 10 mm, for Bormax 22 – 54 mm, Bormax3 (HM) 22 – 50 mm, and other drill bits with a minimum Ø 18 mm |
| Total Length | 130 |
| Usable Length | 100 |
| Shank | 10 |
Login