Patio Floorboards Drill
4 mm with 1/4 inch hex Shank FISCH
€23.90*
Available, delivery time: 2-3 days
Product number: 316415
Product information
The deck board drill consists of 3 components:
- A drill bit with a total length of 110 mm and a drilling depth of 50 mm, which reduces to 42 mm when using the countersink. The drill shank has a diameter of 7 mm in the area where the countersink is attached. The attachment is a 6.35 mm (1/4 inch) hex.
- A countersink with a corresponding inner diameter of 7 mm, an outer diameter of 12 mm, and a length of 44 mm.
- A depth stop ring, which is the same as offered in our depth stop ring assortment. This depth stop ring has a rotatable plastic cap that stops rotating upon contact with the workpiece, preventing unattractive marks caused by friction heat.
| Properties | |
|---|---|
| Diameter | 4 mm |
| Drilling Depth | 50 mm |
| Total Length | 110 mm |
| Shank | Hexagon 6.35 mm (1/4 inch) |
Login