Conical Gouge Slip Stone Grit
4000 SUNTIGER
10% Discount
€56.61*
€62.90*
You save €6.29!
Available, delivery time: 2-3 days
Product number: 313602
Product information
These cone-shaped stones are versatile for use with all rounded chisels regardless of the specific sweep. Both the outside and inside of various gouges can be worked on without any issues. The inner radius is somewhat flatter, about 45 mm. Gouges with a smaller radius are sharpened by swinging them side to side while simultaneously pulling them lengthwise across the stone. For this, the stone should be clamped in place.
| Properties | |
|---|---|
| Outer radius at the cone base | approx. 23 mm |
| Outer radius at the cone tip | approx. 7 mm |
| Width at the cone base | approx. 55 mm |
| Width at the cone tip | approx. 13 mm |
| Total length | approx. 150 mm |
| Inner radius | slightly flatter, approx. 45 mm |
| Grit | 4000 |
| Usage | for fine deburring |
Login