Circular Saw Guide 90°-Angle Foldable 1m

SHINWA

This precise guide rail, to which any circular saw can be applied, makes cross-cutting boards and panels safe and easy. Since the angle can be folded with the large, rubberized handle, this guide rail is ideal for use on assembly, construction sites, or in small workshops. When folded, it takes up just as little space as a wide stop ruler. The centrally located hole allows the rail to be hung up easily, space-savingly, and securely. The 45 cm rail also weighs only about 700 g.

Rubber pads on the underside effectively prevent slipping on the cutting material. The angle part, stop, and rail are made of lightweight aluminum, which ensures fatigue-free working even during prolonged use. The scale is large, high-contrast, and very easy to read. For better positioning of the circular saw or jigsaw on the workpiece, the rail extends about 7 cm beyond the workpiece.

The Japanese manufacturer Shinwa guarantees an angle accuracy of 0.33 mm over 100 mm rail length with these foldable guide rails.

The underside stop that rests against the wood is hollow and equipped with a knurled screw. An 8 × 8 mm strip (included) can be inserted into this hollow stop and secured with the knurled screw. This allows you to determine the distance between the rail and the saw cut edge once, so you always know what distance from the mark you must maintain for future cuts.

• Can be stored compactly since the stop with handle is foldable.
• By simply opening from the folded state, it is quickly ready for use as a guide rail with a stop at any time.
• The lightweight and robust construction facilitates handling and transport.
• Can also be used as a cutting ruler by removing the stop with handle.
• Comes with a groove for the Shinwa sliding stop (available separately) to prevent the cut from deviating.
• Equipped with a metric scale for marking work and measurements.
• Comes with a protective cover for storage.
• A thin and robust stainless steel plate is applied to the edge of the guide rail.

Specification 100-cm Rail

• Angle 90°
• Accuracy: Maximum deviation 0.33 mm over 100 mm rail length
• Scaling up to: 100 cm
• Stop height: 15 mm
• Rail: Aluminum

• Size folded: 1162 × 88 × 73 mm

• Weight: 1040 g
• Accessory: 1 wooden strip 8 × 8 mm