Angle Driver Drill Tool with 1/4 in. hexagonal Chuck
ANEX
10% Discount
10% Discount
10% Discount
10% Discount
10% Discount
€48.51*
€53.90*
You save €5.39!
Available, delivery time: 1-3 days
Product number: 326919
Product information
This right-angle drill attachment is simply clamped into the chuck of the drill or inserted into the 6.35 mm (1/4 inch) holder of a cordless screwdriver. The bits are held in place with a magnet. The additional handle, which is included, can be screwed onto either the right or left side of the housing for extra stabilization. The hollow space in the additional handle serves as storage for bits and is closed with a rubber cap. The working height is only 38 mm with the included, only 15 mm long bits. The delivery includes 4 PH2 bits.
Instructions for Multi-Angle Drill and Screwdriver Attachment
- Loosen the hex screw of the gearbox housing.
- Rotate the loosened housing half until you have the correct angle.
- Tighten the hex screw again. Ensure that the housing parts are engaged before tightening the screw.
| Properties | |
|---|---|
| Working height | 38 mm |
| Mount | 6.35 mm (1/4 Inch) |
| Bits | 4 Bits PH2 |
Login