Allen Key 1.5 mm long arm
50 mm short arm 6 mm ASAHI
Available, delivery time: 2-3 days
Product information
These angle wrenches from Asahi have an extra short arm, allowing them to reach tight and especially height-restricted areas effectively. The short arm is only about half as long as a standard angle wrench. The arm length for each size is specified in the tables below.
Just like Asahi’s standard angle wrenches, these angle wrenches feature a screw-holding function at the end of their long arm (from size 3 mm onwards). This is achieved via a ball plunger, whose ball is pushed outward by a spring, securely holding the screw through the resulting tension.
An additional, very useful feature is the fact that these angle wrenches are bent in a completely different way compared to conventional angle wrenches. In conventional angle wrenches, the short arm is bent at one of the six faces of the hexagon. In these Asahi angle wrenches, the short arm is bent at an edge rather than a face. This increases the contact points on the screw head, allowing the screw to be turned even under conditions that would not permit the use of a conventional angle wrench.
Design with a short long arm. For technical reasons, angle wrenches up to 2.5 mm do not have the holding function.
| Properties | |
|---|---|
| Weight g | 0.7 |
| Manufacturer No. | DW0150 |
| Length short leg mm | 6 |
| Length long leg mm | 50 |
| Hex mm | 1.5 |
Login