Allen Key
2 mm long arm 100 mm short arm 6.5 mm ASAHI
Available, delivery time: 2-3 days
Product information
These angle wrenches from Asahi have an extra-short arm, allowing them to reach confined and especially height-restricted areas effectively. The short arm is only about half as long as a standard angle wrench. The arm lengths for each size are specified in the tables below.
Just like Asahi’s standard angle wrenches, these angle wrenches feature a screw-holding function at the end of their long arm (starting from size 3 mm). This consists of a ball detent, with the ball being pushed outward by a spring, thus securely holding the screw through the resulting tension.
An additional, very useful feature is that these angle wrenches are bent in a completely different way than conventional angle wrenches. In conventional angle wrenches, the short arm is bent at one of the six faces of the hexagon. In these Asahi angle wrenches, the short arm is bent not at a face but at an edge. This increases the contact points on the screw head, allowing the screw to be turned even under conditions that do not permit the use of a conventional angle wrench.
For technical reasons, angle wrenches up to 2.5 mm do not have a holding function.
| Features | |
|---|---|
| Weight g | 2.7 |
| Manufacturer No. | DV0200 |
| Length of short leg mm | 6.5 |
| Length of long leg mm | 100 |
| Hex size mm | 2 |
Login