VERITAS Dual Marking Gauge
With two independently adjustable rods, this gauge lets you set two measurements at once, so you can quickly alternate between them when transferring or marking repetitive dimensions.
Projection up to 5-3/4 inch (146 mm) is easy to set, since an internal O-ring keeps light but constant friction on each rod; a thumbscrew locks the setting. The hardened steel wheel cutters scribe perfectly at any point of their circumference. Since they cut wood fibers rather than tear, marks are clean, even on cross grain.
One rod has its cutting edge at the extreme end of the rod, making it useful for transferring dimensions such as tenon shoulder and mortise depth. Each cutter can be retracted into the brass face for safe storage or to permit use with a single cutter. The eccentric placement of the rods ensures a large reference face and helps the gauge resist rolling on a surface.
Aluminum housing with brass face and stainless-steel rods.
Length 7-1/4 inch (184 mm) overall.
The cutting wheels are oriented with opposing bevels, ensuring that you can always set the bevel in the waste side of a cut.
By registering the tails against either side of a chisel, you can set the cutters to span the exact width of the chisel blade.