Trimatic - Jig for Hinges
Trimatic jigs can be used to help automate routine drilling tasks in the workshop. They are especially useful as they can be used with both a drill press and a portable drill. In general, these jigs can be used by woodworkers to produce suitable holes for the easy installation of furniture hinges.
We carry Trimatic jigs that can be used for drilling straight rows of up to 5 holes, as well as jigs that can create the necessary 3 hole pattern for door hinges, all in one single production step.
Drilling Jig for Blum Hinges
Drill chuck 10 mm
The central drill bit rotates clockwise, while the two outer drill bits rotate counter-clockwise. All you need to provide is a clockwise rotating 35 mm cup hinge drill bit, and two counter-clockwise dowel drill bits. The required diameter of the dowel drill bits are determined by the hinges to be installed. Suitable drill bits can be found below on this page.
Drilling Jig for drilling rows of holes for System 32
For this jig you need 3 clockwise rotating, and two counter-clockwise rotating drill bits with a 4 mm or 5 mm diameter. Suitable drill bits can be found below on this page.