Dieter Schmid's Fine Tools
OTORO Dovetail T-Tracks and Holddown Clamps

OTORO Dovetail T-Tracks and Holddown Clamps

Standard T-slot bars are anchored by screws into the workbench. However, application of strong force may bend and extract these out of their rectangular groove. In comparison, Otoro´s Dovetail T-Tracks are superior as they fit precisely into the corresponding dovetail slot. Locally applied force will not bend the bar. Screw holes are provided, to secure the track from sliding. It is made from high-grade aluminium and anodized in OTORO-pink. A 14° dovetail bit is required to cut the slot.

OTORO hold-down clamps are best suited for these tracks. They are available in two sizes and are easy to slide and use.

OTORO dovetail T-track 14°

Cross-section

Length 610 mm

Code 330810CartPrice € 8.90

Length 914 mm

Code 330811CartPrice € 11.90

OTORO Deluxe Hold-Down Clamp

Fits into OTORO T-tracks
fits also into Aweso T-tracks
Clamping length 100 mm
UNC thread 5/16 in, thread length 75 mm
Slide nut dimensions 21 x 13.2 x 2.5 mm
Individual order

Code 330821CartPrice € 6.90

OTORO Mini Deluxe Hold-Down Clamp Twin-Set

Fits into OTORO T-tracks
fits also into Aweso T-tracks
Clamping length 50 mm
UNC thread 5/16 in, thread length 75 mm
Slide nut dimensions 21 x 13.2 x 2.5 mm
Delivery as twin-set

Code 330820CartPrice € 9.90

OTORO Miter Channel Dovetail 14°

Suitable for all 19 mm miters. INCRA steel and aluminium miter sliders fit into this OTORO channel. This requires the removal of the bottom T-clip, as the OTORO miter channel has no T-extension at the bottom.
Cross section

Length 610 mm

Code 330814CartPrice € 4.90

Length 914 mm

Code 330815CartPrice € 6.90
You are here:   Homepage   →   Power Tool Equipment   →   OTORO Dovetail T-Tracks and Holddown Clamps