Dieter Schmid's Fine Tools
T-Nuts for T-Slots

T-Nuts for T-Slots

T-Nuts for T-Slots with Screw T-Nuts for T-Slots with Screw These T-nuts made by AMF feature a screw fitting, extra thick washer and a hex nut. The head is forged with a precisely milled T-Slot. The type of thread is a rolled thread. M8 to M12 are hardened to property class 10.9 and M14 to 8.8.

T-Nuts can be used for multiple applications: securing of machine vises on the base of drill presses, mounting of saw guides using T-tracks, etc.

When choosing, please pay attention to the sizes in combination with the letter abbreviations. “D” stands for the screw thread designation and should not be confused with “A,” as both numbers can vary greatly. “A” is always a few tenths of a millimeter under the slot width.
T-Nut with Screw with Hex Nut with Washer
Thread M8 (D) for Slot width 8 mm

Note: Price per piece!

A
Shank
Ø
B
Length of
thread
E
T-Width
K
T-Hight
L
Total
length
CodePrice
7.7 mm 22 mm 13 mm 6 mm 32 mm
Code 300553CartPrice € 9.90
7.7 mm 35 mm 13 mm 6 mm 50 mm
Code 300554CartPrice € 10.20
Example:
T-Nut with Screw with M8 thread fits the Aweso T-Tracks perfectly.

Unfortunately this T-nut does not fit Incra T-tracks, as the Incra T-width is only 12 mm.
T-Nut with Screw with Hex Nut with Washer
Thread M10 (D) for Slot width 10 mm

Note: Price per piece!

A
Shank
Ø
B
Length of
thread
E
T-Width
K
T-Hight
L
Total
length
CodePrice
9.7 mm 30 mm 15 mm 6 mm 40 mm
Code 300556CartPrice € 10.20
9.7 mm 45 mm 15 mm 6 mm 63 mm
Code 300557CartPrice € 10.20
Example:
The 10 mm T-nut fits the T-slot of the Duss drill stand..
T-Nut with Screw with Hex Nut with Washer
Thread M12 (D) for Slot width 12 mm

Note: Price per piece!

A
Shank
Ø
B
Length of
thread
E
T-Width
K
T-Hight
L
Total
length
CodePrice
11.7 mm 35 mm 18 mm 7 mm 50 mm
Code 300560CartPrice € 10.90
11.7 mm 40 mm 18 mm 7 mm 63 mm
Code 300561CartPrice € 11.20
T-Nut with Screw with Hex Nut with Washer
Thread M12 (D) for Slot width 14 mm

Note: Price per piece!

A
Shank
Ø
B
Length of
thread
E
T-Width
K
T-Hight
L
Total
length
CodePrice
13.7 mm 35 mm 22 mm 8 mm 50 mm
Code 300565CartPrice € 10.80
13.7 mm 45 mm 22 mm 8 mm 63 mm
Code 300566CartPrice € 11.20
Example:
The T-nut with M12 thread and 13.7 mm shank (total length 50 mm) holds the BDS machine vise on the BDS drill stand perfectly.
You are here:   Homepage   →   Power Tool Equipment   →   T-Nuts for T-Slots