Dieter Schmid's Fine Tools

All JUUMA Planes

JUUMA Block Plane
The plane's body is made of stress-relieved gray cast iron. The 3 mm thick high carbon steel blade is hardened to 61 - 63 HRC. With the introduction of this plane we trust to have closed the large gap between the cheap planes and the premium planes. This plane is the missing link regarding quality and price. with blade adjustment
with mouth adjustment
Weight 850 g (2 lb)
Total length 163 mm (6-1/2 inch)
Plane body width 44 mm (1-3/4 inch)
Blade width 35 mm (1-3/8 inch)
Blade thickness 3 mm (1/8 inch)
Blade hardness 61 - 63 HRC
Cutting angle 45° (Iron bedded at 20°)
Enlargement
Rear view
Manual (PDF 1.3 MB) print out just here
Code 300030CartPrice € 65.00

Repl. Blade for Juuma Block Plane
Code 300031CartPrice € 11.50
JUUMA Low Angle Block Plane
The body of this low angle block plane is made of stress-relieved gray cast iron. The 3 mm thick high carbon steel blade is hardened to 61 - 63 HRC. With the introduction of this plane we trust to have closed the large gap between the cheap planes and the premium planes. This plane is the missing link regarding quality and price.
with blade adjustment
with mouth adjustment
Weight 850 g (2 lb)
Total length 163 mm (6-1/2 inch)
Plane body width 44 mm (1-3/4 inch)
Blade width 35 mm (1-3/8 inch)
Blade thickness 3 mm (1/8 inch)
Blade hardness 61 - 63 HRC
Cutting angle 38° (Iron bedded at 13°)
Enlargement
View from the side
Manual (PDF 1.3 MB) print out just here
Code 300050CartPrice € 75.00

Repl. Blade for JUUMA Low Angle Block Plane
Code 300051CartPrice € 11.50
JUUMA Rabbet Block Plane
The ideal plane for rabbeting, panel raising and trimming tenons. The plane's body is made of stress-relieved gray cast iron. The 3 mm thick high carbon steel blade is hardened to 61 - 63 HRC. With the introduction of this plane we trust to have closed the large gap between the cheap planes and the premium planes. This plane is the missing link regarding quality and price.
With blade adjustment
Weight 800 g (1-3/4 lb)
Total length 163 mm (6-1/2 inch)
Plane body width 44 mm (1-3/4 inch)
Blade width 44 mm (1-3/4 inch)
Blade thickness 3 mm (1/8 inch)
Blade hardness 61 - 63 HRC
Cutting angle 37° (Iron bedded at 12°)
Enlargement
Manual (PDF 1.3 MB) print out just here
Code 300052CartPrice € 69.00

Repl. Blade for JUUMA Rabbet Block Plane
Picture
Code 300053CartPrice € 11.50
JUUMA Low Angle Jack Plane
The plane's body is made of stress-relieved gray cast iron. The frog is made of brass. The 3 mm thick high carbon steel blade is hardened to 61 - 63 HRC. Mouth adjustement goes smooth and allows settings for fine work. The handles are made of Bubinga. With the introduction of this plane we trust to have closed the large gap between the cheap planes and the premium planes. This plane is the missing link regarding quality and price. Length 350 mm
Blade width 50.7 mm
Bevel 25°
Blade bed 12°
Weight 2450 g
Manual (PDF 1.3 MB) print out just here
This item we ship only within the European Union!
Code 300056CartPrice € 175.00

Replacement Blade 25° for Low Angle Jack Plane
Picture
Code 300057CartPrice € 16.50
JUUMA Smoothing Plane no. 4
The plane's body is made of stress-relieved gray cast iron. The frog is made of brass. The 3 mm thick high carbon steel blade is hardened to 61 - 63 HRC and connected with a thick and stable chipbreaker. The handles are made of Bubinga. With the introduction of this plane we trust to have closed the large gap between the cheap planes and the premium planes. This plane is the missing link regarding quality and price.
Total length 250 mm (10 inch)
Width of body 62 mm (2-7/16 inch)
Blade width 50.8 mm (2 inch)
Blade thickness 3.2 mm (1/8 inch)
Blade hardness 61 - 63 HRC
Chipbreaker thickness 3 mm (1/8 inch)
Iron bedded at 45°
Weight 2200 g (4-1/2 lb)
Enlargement
Rear view
This item we ship only within the European Union!
Currently not in stock!
Code 300034Cart Price € 145.00

Repl. Blade for Juuma Smoothing Plane No. 4
Code 300035CartPrice € 13.50
JUUMA Jack Plane no. 5
The plane's body is made of stress-relieved gray cast iron. The frog is made of brass. The 3 mm thick high carbon steel blade is hardened to 61 - 63 HRC and connected with a thick and stable chipbreaker. The handles are made of Bubinga. With the introduction of this plane we trust to have closed the large gap between the cheap planes and the premium planes. This plane is the missing link regarding quality and price.
Total length 353 mm (14 inch)
Width of body 62 mm (2-7/16 inch)
Blade width 50.8 mm (2 inch)
Blade thickness 3.2 mm (1/8 inch)
Blade hardness 61 - 63 HRC
Chipbreaker thickness 3 mm (1/8 inch)
Iron bedded at 45°
Weight 2750 g (6 lb)
This item we ship only within the European Union!
Currently not in stock!
Code 300036Cart Price € 165.00

Repl. Blade for Juuma Jack Plane no. 5
Code 300035CartPrice € 13.50
JUUMA Fore Plane no. 6 (Small Jointer)
The plane's body is made of stress-relieved gray cast iron. The frog is made of brass. The 3 mm thick high carbon steel blade is hardened to 61 - 63 HRC and connected with a thick and stable chipbreaker. The handles are made of Bubinga. With the introduction of this plane we trust to have closed the large gap between the cheap planes and the premium planes. This plane is the missing link regarding quality and price.
Total length 450 mm (17-3/4 inch)
Width of body 72 mm (2-7/8 inch)
Blade width 60 mm (2-3/8 inch)
Blade thickness 3.2 mm (1/8 inch)
Blade hardness 61 - 63 HRC
Chipbreaker thickness 3 mm (1/8 inch)
Iron bedded at 45°
Weight 3750 g (6 lb)
This item we ship only within the European Union!
Code 300037CartPrice € 189.00

Repl. Blade for Juuma Fore/Jointer Plane no. 6 + 7
Code 300038CartPrice € 16.50

Hardness Test of Blades

Random samples test resulted in the following:

Hardness Test

Left: JUUMA block plane
Center and right: JUUMA smoothing plane no. 4

You are here:   Homepage   →   Planes   →   Smoothing Planes / Jack Planes / Jointer Planes / Block Planes   →   JUUMA Planes