The INCRA Track System is the optimum solution to any cutting operation that requires accuracy, repeatability, multiple stop positions, or just plain ease of use. It will dramatically increase the precision and performance of your Miter Gauge, Drill Press, Miter Saw, Radial Arm Saw , and an unlimited variety of shop-made jigs and fixtures.
The key is INCRA's patented sawtooth racks (picture left) which position your work instantly and automatically in EXACT 1 mm steps with true machine shop precision without measuring. It's also micro adjustable to fine-tune your position anywhere between fixed steps.
Multiple T-slots and through holes provide a means for quickly and easily attaching these rigid aluminum track sections to virtually any woodworking tool. Shop-made wooden subfence, used to provide splinter-free zero clearance support or to extend fence length or height, slides directly into a T-slot along the Track's front face. The heart of the System, the INCRA Shop Stop, is expandable to accommodate any fence thickness up to 1-1/2 inch (38 mm). It's vertically adjustable to accommodate any fence height up to 3-1/2 inch (89 mm).
INCRA Track with Shop Stop:
INCRA Track with drill press:
INCRA Track with miter saw:
INCRA Tracks Metric
The INCRA Tracks are available in 457 mm, 914 mm, and 1321 mm lengths. The profile is 40 mm high and 38 mm wide. These universal fences will easily attach to nearly any horizontal or vertical surface using a wide variety of mounting holes and T-slots. Mounting hardware is included. The design also features T-slots on the working face for attaching zero-clearance sub fences for splinter-free crosscutting.
INCRA Track is equipped with Incra's patented incremental rack system for outstanding stop positioning accuracy and 1/1000 inch (0.02 mm) repeatability when used with the INCRA Shop Stop to give your jigs, fixtures, and fence system cutting precision not available anywhere else.
Note: INCRA Track is NOT compatible with the Flip Shop Stop used on Incra miter gauge fences.
We sell the the track sections separately, without Shop Stop. The Shop Stop you find here
. See Tracks with Shop Stop
. Shown machines and Shop Stop not included!
The Shop Stop works with all INCRA Router Fences that are equipped with 1mm incremental racks, INCRA Track Systems, and standard, "non-Flip" IncraLOCK Cut-off Miter Gauge Fences. It is NOT compatible with Flip Fences for INCRA Miter Gauges.
Shop Stop not included!
INCRA 457 mm Track Section only
INCRA 914 mm Track Section only
INCRA 1321 mm Track Section only
INCRA Shop Stop METRIC
The INCRA ShopStop is INCRA's most versatile stop. The vertical stop bar is adjustable up and down, it can be reversed, and it has a screw-based micro adjust. The Shop Stop is also expandable - the top section can be slid into a second channel on the base section to make the interior wide enough to span an INCRA fence and a wooden sub fence of up to 3/4 inch.
INCRA's patented positioning mechanics make it deadly accurate and completely repeatable.
The Shop Stop works with all INCRA Router Fences that are equipped with 1 mm incremental racks, INCRA Track Systems, and standard, "non-Flip" IncraLOCK Cut-off Miter Gauge Fences. It is NOT compatible with Flip Fences for INCRA Miter Gauges.
On the picture you see the imperial version with black rack, we supply the metric version with red rack! Metric racks
can also be be purchased separately.