Dieter Schmid's Fine Tools
t-tracks

INCRA CleanSweep Downdraft Dust Collection Cabinet

INCRA CleanSweep Downdraft Dust Collection Cabinet
INCRA CleanSweep Downdraft Dust Collection Cabinet
Use the power of your shop's dust collection system to grab sawdust where it's produced - on your router table!

The CleanSweep Cabinet attaches to the underside of laminated MDF or phenolic router tables from INCRA, Woodpeckers, JessEm, and many others (see compatibility notes below).

The vacuum generated inside the cabinet by your 4 inch dust collection hose pulls chips and fine dust downward past the router bit, keeping the table surface and your surrounding shop cleaner than you'd ever imagined. The effect is even more powerful when combined with INCRA CleanSweep Rings for MagnaLOCK router plates and router lifts (CleanSweep Rings see below).

Unlike a dust port mounted on the fence, the CleanSweep cabinet works for every cut and not just when the fence is covering the router bit, giving you excellent collection even when routing grooves, making box joints & dovetails, or shaping curved edges without a fence.

This must-have accessory is one of the easiest ways to improve the quality of your router table time!

Note: The CleanSweep cabinet is intended for use only with conventional woodworking dust/chip collectors that have a minimum 4 inch (100 mm) inlet diameter.

INCRA CleanSweep Router Table Dust Collection Cabinet Features:
  • Keeps Your Shop Cleaner by Collecting Sawdust at the Source
  • Works for Every Cutting Operation Including Routing Grooves and Cutting Box Joints & Dovetails
  • Installs Easily on Every INCRA Router Table
  • Reduces Router Noise
  • Combine with INCRA CleanSweep Rings for Added Performance
  • Precision Molded ABS & Steel Cabinet Assembles Quickly & Accurately
  • Integrated 4 inch Steel Blast Gate, 4 inch Hose Clamp and Mounting Hardware Included
  • Vertically-sliding Door Saves Space, Seals Tightly, and Won't Slam Closed
Compatibility notes for common router table types:

The CleanSweep cabinet screws directly to the underside laminated MDF and phenolic router tables that have their bottom table opening and related hardware within the CleanSweep's 9-1/8" x 12-3/4" inside dimensions.

Kreg , Woodhaven, and laminated MDF tables from JessEm require the CleanSweep Table Adapter (not in stock, only on request) to clear the bottom-mounted leveling mechanism used at their table openings' corners.

Max. outside measurements:
height 400 mm, width 340 mm, depth 375 mm
Min. inside measurements:
height 320 mm, width 235 mm, depth 320 mm
Recess for cable exists in slider.

The CleanSweep cabinet is not directly compatible with router tables that use remotely-operated router lifts.
Note: Router table, hose, and router lift NOT included.
Watch 3 videos

Code 314627CartPrice € 119.00
INCRA 6-pc CleanSweep MagnaLOCK Ring Set
INCRA CleanSweep MagnaLOCK Ring
INCRA 6-pc CleanSweep MagnaLOCK Ring Set
Use the power of your shop's dust collection system to grab sawdust where it's produced, even for previously dusty work like routing grooves, box joints and dovetails!

The laser-cut steel rings feature extra openings in strategic locations to dramatically increase dust-collecting downward airflow when combined with an INCRA CleanSweep Dust Collection Cabinet and your 4 inch dust collection hose.

The rings fit all INCRA MagnaLOCK Plates and Lifts produced since 2006 (see compatibility below) and are available in inside diameters to cover a wide variety of router bits - 3/8, 5/8, 1, 1-3/8, 1-5/8, & 1-7/8 inch.

Downdraft-style dust collection works for every cut, not just when the fence is over the router bit, and it's one of the easiest ways to improve your router table experience! spacer

Compatibility notes for common router table types:

These rings fit ONLY 2006- or newer INCRA router plates and lifts that have a 3-5/8 inch opening through the bottom of the plate. These rings are NOT compatible with grey phenolic MagnaLOCK router plates or first-generation gold INCRA Mast-R-Lifts that have a 3-1/2 inch opening through the bottom of the plate.

Code 314628CartPrice € 53.00
INCRA CleanSweep MagnaLOCK Porter-Cable Guide Bushing Ring
INCRA CleanSweep MagnaLOCK Porter-Cable Guide Bushing Ring
This CleanSweep ring fits all INCRA MagnaLOCK Plates and Lifts produced since 2006 (see compatibility notes). Features a 1-3/16 inch inside diameter within a shouldered recess to accept standard Porter-Cable style guide bushings.

Note: Porter-Cable Guide bushing and lock ring (yellow parts on picture) NOT included.

Code 314631CartPrice € 12.90
INCRA CleanSweep Router Table Adapter for NON-Incra tables with external levelers
INCRA CleanSweep Router Table Adapter for NON-Incra tables with external levelers
Improve your router table’s dust collection! This computer-machined MDF adapter allows attaching the INCRA CleanSweep dust collection cabinet to router tables with corner-mounted plate levelers and 9-1/4 x 11-3/4 inch (235 x 298mm) plate openings such as Kreg, Woodhaven, and laminated MDF tables from JessEm.

In addition to providing normal access to these tables’ original corner-mounted lever leveling system, the adapter replicates the router plate support ledge found in the openings of INCRA router tables, complete with 10 large-diameter leveling bolts.

Because it increases the plate’s support surface, the CleanSweep Adapter is perfect if you own a Kreg or other "ledge-less" router table and want to upgrade to compatibility with an INCRA MagnaLOCK router mounting plate or router lift.

Includes 10 low-head router plate leveling bolts, screws for attaching the adapter to the router table, and longer screws for mounting the INCRA CleanSweep dust collection cabinet. The outside dimensions are 15 1/2 x 15 1/2 inch (394 x 394mm).

Code 314629CartPrice € 24.90
You are here:   Homepage   →   Power Tool Equipment   →   INCRA CleanSweep Downdraft Dust Collection Cabinet