Replacement Blades for Wooden Planes

 

Blades with chipbreaker for all planes that hold the blade with a wedge, i. e. all standard wooden planes. They fit both Ulmia and ECE planes, if the requested width is the same.

Width	Maker	Suitable for	CodePrice
48 mm	ECE or TWO CHERRIES	Smoother 301023, 301025, 301063, 301065 Doppelhobel 301020, 301022, 301060, 301062 small ECE jointer 301030	Code 301207Price ∗ € 28.90
60 mm	ECE	Jointer 301028, 301029	Code 301199Price ∗ € 35.90

 

Blades without chipbreaker for all planes that hold the blade with a wedge, i. e. all standard wooden planes. They fit both Ulmia and ECE planes, if the requested width is the same. Take these, if your chipbreaker is still o.k.

Width	Maker	Suitable for	CodePrice
48 mm	ECE or TWO CHERRIES	Smoother 301023, 301025, 301063, 301065 German jack plane 301020, 301022, 301060, 301062 small ECE jointer 301030	Code 301215Price ∗ € 18.90
60 mm	ECE	Jointer 301028, 301029	Code 301299Price ∗ € 24.50

 

ECE Primus Blades with Chipbreaker and lateral blade adustment for Primus planes.
ECE Primus Blade Width 48 mm with Chipbreaker
suitable for
Primus Smoother 301003, 301004, 301024, 301067
Primus Reform Smoother 301047
Primus German Jack Plane 301001, 301002,
Primus English Jack Plane 301011, Primus Short Jointer 301012,


ECE Primus Blade Width 60 mm with Chipbreaker
suitable for Primus Jointer 301009, 301010

 

ECE Primus Blades without Chipbreaker for Primus planes, if your chipbreaker is still o.k.
ECE Primus Blade Width 48 mm without Chipbreaker
suitable for
Primus Smoother 301003, 301004, 301024, 301067
Primus Reform Smoother 301047
Primus German Jack Plane 301001, 301002,
Primus English Jack Plane 301011, Primus Sort Jointer 301012,


ECE Primus Blade Width 60 mm without Chipbreaker
suitable for Primus Jointer 301009, 301010

Tension Screw for ECE Primus Planes as on the image with nut, spring and washer.

Länge 130 mm
suitable for Primus German Jack Plane 301001, 301002

ECE Toothed Blade

This toothed plane blade is for working wood with difficult grain and/or lots of knots. After surfacing with the toothed plane, the wood can then be worked flat relatively easily with a smoothing plane, scraper plane or a cabinet scraper.

The blade is not designed to be used in a normal bench plane however. The cutting angle of a bench plane is normally 45 - 50 degrees. But the body of a toothed plane is normally made to give a cutting angle of about 75 degrees, and so mounting this blade in a normal body will not give good results, as the higher cutting angle is needed to allow the blade to cut properly and reduce the chance of tear-out.

Width 48 mm
for: ECE toothed plane 301051 and other wooden toothed planes with same blade width, including Ulmia.

 

ECE Scrub Plane Blade Single iron for scrub planes. These blades fit usually the planes of other makers too, if the width is the same.
Width 33 mm
for ECE-Scrub 301050

 

Single Rebate Plane Blade They fit both Ulmia and ECE planes, if the requested width is the same and fit nearly all wooden rebate planes with blades without chipbreaker.

Width	Maker	suitable for	CodePrice
30 mm	ECE	ECE rebate Plane with single iron 301035, 301037 ECE chisel Plane 301034 ECE Glazier's rabbet plane 301041	Code 301206Price ∗ € 13.90

 

ECE Rebate plane blade with chipbreaker for rebate planes with double iron These blades are for rebate planes with double iron. They fit both Ulmia and ECE planes, if the requested width is the same.
Width 30 mm
suitable for:
ECE Rebate Plane with double iron 301038, 301040
ECE Glazier's rabbet plane 301041

 

ECE Rebate Plane Blades for double iron planes without chipbreaker Same as above, but without chipbreaker. Buy this, if your chipbreaker is still o.k.
Width 30 mm
suitable for:
ECE Rebate Plane with double iron 301038, 301040
ECE Glazier's rabbet plane 301041

 

ECE Primus Rebate Plane Blade with Chipbreaker They fit only the ECE Primus rebate plane 301008.
Width 30 mm

 

ECE Primus Rebate Plane Blade without Chipbreaker They fit only the ECE Primus rebate plane 301008. Buy this, if your chipbreaker is still o.k.
Width 30 mm
Currently not in stock!

 

Blade for ECE Block Plane Fits only the ECE block plane, comes without chipbreaker.
Width 39 mm

Router Plane Blades For Router planes. All our router plane blades fit ECE and Ulmia router planes as well.

Width	Maker	suitable for	CodePrice
Set of 3 10 mm 15 mm 20 mm	ECE	ECE and Ulmia	Code 301212Price ∗ € 59.00

Blades for Plough Planes For plough planes made by ECE. In many cases these blades do NOT fit older plough planes!

Width	Maker	suitable for	CodePrice
Set of 6 4+5+7+9+12+14 mm	ECE	ECE and Ulmia	Code 301056Price ∗ € 169.00

 

Filletster plane blade for ECE-Filletster plane 301048 Width 33 mm

 

ECE Dovetail Plane Blade for ECE-Dovetail plane 301049 Width 33 mm