Dieter Schmid's Fine Tools
Fine Rasps HISTORIC

Fine Rasps HISTORIC

The new HISTORIC Rasps from Grobet in Switzerland - in Germany marketed under the brand Friedr. Dick - have an unusually fine cut. These rasps are cut by machine. The process of forming the teeth is controlled by a computer so that the result, a somewhat irregular tooth pattern, is very similar to that of a hand-cut rasp. It is interesting to note that the irregular tooth pattern of hand cut rasps is increasingly seen as a model for machine cut tools. The irregularity of the teeth allows them to cut quickly and leave a much smoother surface. The last teeth near the tip of the HISTORIC rasps though, are cut by hand, because the rasp blanks are clamped in the cutting machine by the tip, and so the machine’s burin cannot reach the end!

pointed
half pointed
blunt

The points of the Historic Rasps are finished out differently depending on the shape of the tip.
From left to right: pointed, half pointed, blunt

Historic Rasps come without handle. Handles you find here!

HISTORIC Rasp flat (hand) Cuts on 3 sides
HISTORIC Rasp flat
Length Cut Diameter Shape of tip CodePrice
150 mm 7 = extra fine 15.5 x 3.5 mm blunt
Code 302750CartPrice € 79.00
200 mm 6 = fine 19.3 x 4.5 mm blunt
Code 302751CartPrice € 79.00
HISTORIC Rasp halfround Cuts on both sides
HISTORIC Rasp halfround
Length Cut Diameter Shape of tip CodePrice
160 mm 7 = extra fine 15.1 x 4.5 mm half pointed
Code 302753CartPrice € 78.00
215 mm 6 = fein 20 x 5.85 mm half pointed
Code 302754CartPrice € 89.00
265 mm 7 = sehr fein 25.2 x 7.25 mm half pointed
Code 302755CartPrice € 99.00
HISTORIC Rasp halfround narrow Cuts on both sides
HISTORIC Rasp halfround narrow
Length Cut Diameter Shape of tip CodePrice
165 mm 7 = extra fine 12.3 x 4.68 mm pointed
Code 302756CartPrice € 79.00
205 mm 6 = fine 15.5 x 5 mm pointed
Code 302757CartPrice € 85.00
HISTORIC Rasp halfround narrow thin Cuts on both sides
HISTORIC Rasp halfround narrow thin
Length Cut Diameter Shape of tip CodePrice
200 mm 6 = fine 25 x 4.4 mm blunt
Code 302758CartPrice € 95.00
250 mm 5 = medium 21.8 x 4.3 mm blunt
Code 302759CartPrice € 95.00
250 mm 6 = fine 21.8 x 4.3 mm blunt
Code 302760CartPrice € 98.00
HISTORIC Rasp Cabinet narrow Cuts on both sides
HISTORIC Rasp Cabinet narrow
Length Cut Diameter Shape of tip CodePrice
150 mm 7 = extra fine 18 x 3.5 mm pointed
Code 302761CartPrice € 79.00
250 mm 6 = fine 26 x 5.2 mm pointed
Code 302763CartPrice € 99.00
250 mm 7 = extra fine 26 x 5.2 mm pointed
Code 302764CartPrice € 99.00
HISTORIC Rasp round Cuts all around
HISTORIC Rasp round
Length Cut Diameter Shape of tip CodePrice
150 mm 7 = extra fine 6 mm half pointed
Code 302765CartPrice € 65.00
200 mm 6 = fine 7.5 mm half pointed
Code 302766CartPrice € 69.00
250 mm 6 = fine 9 mm half pointed
Code 302767CartPrice € 69.00
You are here:   Homepage   →   Rasps and Files   →   HISTORIC Rasps