Dieter Schmid's Fine Tools
Bull Nose Radius Cutters

Bull Nose Radius Cutters

Bull Nose Radius Cutters
Bull nose radius cutters are used to cut half round profiles in the edges of moldings. With two passes, one can also make dowels with these cutters. They have no ring bearing!

These Sistemi Klein router bits are Tungsten Carbide tipped (TCT).

Bull Nose Radius Cutters

Dia-
meter
D
Cutting
length
B
Total
length
L
Radius

R
Shank
diameter
S
Material CodePrice
13.5 mm 13 mm 41 mm 2 mm 8 mm TCT
Code 360570CartPrice € 22.90
15 mm 13 mm 42 mm 2.8 mm 8 mm TCT
Code 360571CartPrice € 25.60
16.7 mm 19 mm 48 mm 3.6 mm 8 mm TCT
Code 360572CartPrice € 28.90
22.2 mm 19 mm 48 mm 5.2 mm 8 mm TCT
Code 360573CartPrice € 35.90
26 mm 25 mm 54 mm 6.8 mm 8 mm TCT
Code 360574CartPrice € 44.90

Note: cutters below with 12 mm Shank

Dia-
meter
D
Cutting
length
B
Total
length
L
Radius

R
Shank
diameter
S
Material CodePrice
22 mm 19 mm 57 mm 5 mm 12 mm TCT
Code 361400CartPrice € 37.90
28 mm 25 mm 64 mm 8 mm (5/16") 12 mm TCT
Code 361403CartPrice € 52.50
33.3 mm 35 mm 73 mm 9.5 mm (3/8") 12 mm TCT
Code 361404CartPrice € 54.50
Note: Numbers 361403, 361404 are suitable for the Incra Hingcrafter!
Bull Nose Radius Cutters
You are here::   Homepage   →   Router Bits   →   Bull Nose Radius Cutters