Dieter Schmid's Fine Tools
Diamond paste

Diamond paste

Diamond paste is used in the polishing and lapping of materials. It is intended for woodworkers, or anyone else for that matter, who wants to grind and hone blade edges using a flat steel honing plate. The use of blocky and jagged synthetic diamond chips in this paste ensures good stock removal and uniform, reproducible results. For a suitable baseplate see steel honing plate.

Diamond paste

This diamond paste consists of sharp, monocrystalline diamond chips in a mineral oil base.

Note regarding chip size:
1 μm (micron) = 1/1000 millimetre (0.001 mm).

6 μm diamond paste in a 10 g syringe

This corresponds to a Japanese 2500 grit grade water stone or a 4000 grit grade micromesh.

Primarily for honing plane blades and chisels with a residual abrasive effect.

Code 320830CartPrice € 17.90

3 μm diamond paste in a 10 g syringe

This corresponds to a Japanese 4000 grit grade water stone or a 8000 grit grade micromesh.

This corresponds to a Japanese waterstone grit 4000 or Micromesh grit 8000. For honing plane blades and chisels to a polished finish.

Code 320834CartPrice € 17.90

1 μm diamond paste in a 10 g syringe

This corresponds to a Japanese 8000 grit grade water stone or a 15000 grit grade micromesh.

For honing plane blades and chisels to a high-gloss finish.

Currently not in stock!
Code 320840Cart Price € 17.90
You are here:   Homepage   →   Sharpening Tools, Waterstones   →   Diamond paste