Cabinet Scrapers, Burnishers, Scraper Holders
Scrapers, despite the ubiquitous sandpaper, continue to be a useful means of delicately removing shavings, old layers of paint, lacquer or polish, and even ingrained dirt. Admittedly, the scraper is a tool that not everybody masters at the first attempt. It is not expensive and it is hallowed by tradition, but it does require practice and an understanding of how it works. How to sharpen scrapers?
On purchase a scraper is not usually ready for use, but simply a piece of sheet steel, which can only fulfil its task when it has been given a fine burr. If you find a burr on a scraper you buy, it is no more than an accidental byproduct of the metal-cutting process.
If you are interested in scrapers you also may be interested in these VERITAS Ball Joint Scraper!
TWO CHERRIES Scrapers
are well reputed among cabinetmakers. They are made of Swedish steel.
are well reputed among cabinetmakers. They are made of Swedish steel.
| Shape | Size mm | Thick- ness mm |
Order nr. | Price |
|---|---|---|---|---|
| rectangular | 150 x 60 | 0.6 | 300971  |
€ 2.90 |
| rectangular | 150 x 60 | 0.8 | 300972 |
€ 2.90 |
| rectangular | 150 x 60 | 1.0 | 300973 |
€ 3.40 |
| concave convex | 150 x 50 | 0.7 | 300974 |
€ 3.50 |
| swan neck | 130 x 75 | 0.7 | 300975 |
€ 4.60 |
CROWN Scrapers
Set of 3 scrapers, consisting of one rectangular (127 x 63 mm), one convex-concave (152 x 51 mm), and one swan-necked (117 x 75 mm) blade thickness 0.8 mm
Order nr. 303291
Price € 11.50
Set of 3 scrapers, consisting of one rectangular (127 x 63 mm), one convex-concave (152 x 51 mm), and one swan-necked (117 x 75 mm) blade thickness 0.8 mm
Order nr. 303291
Price € 11.50
CLIFTON Scrapers
Set of 3 scrapers, consisting of one rectangular (127 x 64mm (5 in. x 2-1/2 in.), one convex-concave, and one swan-necked blade
Thickness 0.8 mm
Order nr. 303768
Price € 12.20
Set of 3 scrapers, consisting of one rectangular (127 x 64mm (5 in. x 2-1/2 in.), one convex-concave, and one swan-necked blade
Thickness 0.8 mm
Order nr. 303768
Price € 12.20
Burnishers, Scraper Holder, File Holder
TWO CHERRIES Burnisher
Three-edged burnisher for getting a burr on scrapers
Order nr. 300408
Price € 15.80
Three-edged burnisher for getting a burr on scrapers
Order nr. 300408
Price € 15.80
RON HOCK Burnisher
Round Burnisher for getting a burr on scrapers. Comes without handle. Find handles here! You need to bore the hole wider.
Order nr. 307643
Price € 16.50
Round Burnisher for getting a burr on scrapers. Comes without handle. Find handles here! You need to bore the hole wider.
Order nr. 307643
Price € 16.50
CLIFTON Burnisher
Round Burnisher for getting a burr on scrapers. With rosewood handle and nice brass ferrule to protect the hand.
Order nr. 303769
Price € 31.95
Round Burnisher for getting a burr on scrapers. With rosewood handle and nice brass ferrule to protect the hand.
Order nr. 303769
Price € 31.95
VERITAS Variable Burnisher
The VERITAS variable burnisher makes the process of putting a hook on a cabinet scrapers easy and perfectly repeatable. All you have to do is set the hook angle you want and burnish the clamped scraper. A precision-ground tungsten carbide rod in the brass angle setting knob is held at exactly the right angle as you burnisch. CAUTION: Because the scraper edge is extremly sharp, the body is designed to be used on the pull stroke. It is not necessary to appply great pressure on the scraper while burnishing, repeated passes will roll the edge of the scraper much more consistently and with minimal effort. Instructions
Order nr. 307990
Price € 34.90
The VERITAS variable burnisher makes the process of putting a hook on a cabinet scrapers easy and perfectly repeatable. All you have to do is set the hook angle you want and burnish the clamped scraper. A precision-ground tungsten carbide rod in the brass angle setting knob is held at exactly the right angle as you burnisch. CAUTION: Because the scraper edge is extremly sharp, the body is designed to be used on the pull stroke. It is not necessary to appply great pressure on the scraper while burnishing, repeated passes will roll the edge of the scraper much more consistently and with minimal effort. Instructions
Order nr. 307990
Price € 34.90
VERITAS Scraper Holder
Anyone who works with scrapers a lot will know that there is an unpleasant side-effect, burnt fingers from the heat generated by the friction. Help is to hand with this scraper grip, which means you don't touch the scraper itself. It also allows you to decide in advance how much curvature to work with. For rectangular scrapers with 150 mm side (+ - 3 mm). The Crown and Clifton scrapers are too small for this grip, we recommend to use Eberle or Two Cherries scrapers. How ist works!
Order nr. 307961
Price € 38.50
Anyone who works with scrapers a lot will know that there is an unpleasant side-effect, burnt fingers from the heat generated by the friction. Help is to hand with this scraper grip, which means you don't touch the scraper itself. It also allows you to decide in advance how much curvature to work with. For rectangular scrapers with 150 mm side (+ - 3 mm). The Crown and Clifton scrapers are too small for this grip, we recommend to use Eberle or Two Cherries scrapers. How ist works!
Order nr. 307961
Price € 38.50
Scraper holder made of wood
Simple and effective, with wooden locking screw. For all scraper up to length of 155 mm (6 in.)
Order nr. 300105
Price € 15.90
Simple and effective, with wooden locking screw. For all scraper up to length of 155 mm (6 in.)
Order nr. 300105
Price € 15.90
VERITAS Jointer and Edger (File Holder)
A flat file can be clamped in this helpful piece of equipment, to make it easier to file the scraper exacly at right angles as required. It is also possible to use it for truing saws. A 45° fence is for sharpening scraping plane blades. More ...
Order nr. 307960
Price € 19.60
A flat file can be clamped in this helpful piece of equipment, to make it easier to file the scraper exacly at right angles as required. It is also possible to use it for truing saws. A 45° fence is for sharpening scraping plane blades. More ...
Order nr. 307960
Price € 19.60
Flat file to produce the clean edge on scrapers
Working length 200 mm, cross-section 19 x 4.8 mm, supplied without handle, cut 3, maker: Nicholson. A very effective tool in conjunction with the Veritas Jointer and Edger!
Order nr. 314050
Price € 6.90
Working length 200 mm, cross-section 19 x 4.8 mm, supplied without handle, cut 3, maker: Nicholson. A very effective tool in conjunction with the Veritas Jointer and Edger!
Order nr. 314050
Price € 6.90
