Tenon Cutters, Tapered Snug Plug Cutters

Tenon Cutters, Tapered Snug Plug Cutters

Our quality dowel and tenon cutters come from FAMAG, Germany and FISCH, Austria. The VERITAS tenon cutters are a great choise when working with green wood.

The length of tenons and dowels you can make with the tools on this page is limited. If you want to make dowels of unlimited length, please visit our dowel making tools page.

FAMAG Plug, Dowel and Tenon Cutter Series 1616 FAMAG Plug, Dowel and Tenon Cutter Series 1616
To make tenons, plugs and dowels. High End tool suitable for large quantities and high accuracy!

Important: Use only in a drill press, clamp the workpiece!
To make accurate holes: the best bits for plugging are the BORMAX bits.
All measurements in mm!

Diameter of plug
mm
Shaft
mm
Total length
mm
Max. length of plug
mm
Order nr.Price
6 13 140 70
Price € 74.50
8 13 140 70
Price € 81.90
9 13 140 70
Price € 86.90
10 13 140 70
Price € 66.50
12 13 140 70
Price € 72.50
14 13 140 70
Price € 72.50
15 13 140 70
Price € 72.50
16 13 140 70
Price € 77.50
18 13 140 70
Price € 77.50
20 13 140 70
Price € 77.50
22 13 140 70
Price € 85.90
25 13 140 70
Price € 85.90
30 13 140 70
Price € 94.50
35 13 140 70
Price € 104.50
Note: The tenon cutter with diameter 35 mm has a 16 mm shank which is too big for a standard 13 mm drill chuck.
FAMAG Set of 5 Plug Cutters
FAMAG Set of 5 Plug Cutters
in wooden box
15, 20, 25, 30, 35 mm
Wichtig: Tisch- oder Ständerbohrmaschine benutzen, Werkstück einspannen!
Price € 375.00
Zapfenschneider FISCH Plug, Dowel and Tenon Cutter extra long and in inch-measurements
Important: Use only in a drill press, clamp the workpiece!

FISCH Plug Cutters in mm measurements
Diameter of plug
mm
Shaft
mm
Total length
mm
Max. length of plug
mm
Order nr.Price
6 13 140 80
Price € 77.20
35 16 160 100
Price € 79.50
35 16 260 200
Price € 319.00
40 16 160 100
Price € 94.50
45 16 160 100
Price € 105.50
50 16 160 100 Currently not in stock!
Price € 121.50
55 16 160 100
Price € 129.50
60 16 160 100
Price € 145.50
Plug Cutters in INCH measurements
Diameter of plug Shaft
inch (mm)
Total length
inch (mm)
Max. length of plug
inch (mm)
Order
nr.
inch mm
1/2 12.7 1/2 (13 mm) 5-1/2 (140 mm) 3 (80 mm)
Price € 53.50
3/4 19.05 1/2 (13 mm) 5-1/2 (140 mm) 3 (80 mm)
Price € 64.50
7/8 22.22 1/2 (13 mm) 5-1/2 (140 mm) 3 (80 mm)
Price € 68.50
1 25.4 1/2 (13 mm) 5-1/2 (140 mm) 3 (80 mm)
Price € 69.50
1-1/4 31.75 1/2 (13 mm) 5-1/2 (140 mm) 3 (80 mm)
Price € 82.50
1-3/8 34.87 1/2 (13 mm) 6-19/64 (160 mm) 4 (100 mm)
Price € 84.50
1-5/8 41.27 1/2 (13 mm) 6-19/64 (160 mm) 4 (100 mm)
Price € 96.50
1-3/4 44.45 1/2 (13 mm) 6-19/64 (160 mm) 4 (100 mm)
Price € 106.50
1-7/8 47.55 1/2 (13 mm) 6-19/64 (160 mm) 4 (100 mm)
Price € 122.50
2 50.8 1/2 (13 mm) 6-19/64 (160 mm) 4 (100 mm)
Price € 125.50
Plug Cutter and Countersink Set
Plug Cutter and Countersink Set
Plug Cutter and Countersink Set
This tool works very well to fill loose or broken knots in wood or to repair damaged spots. You can also make your own side-grain plugs, perfectly matched, from the wood of your choice.
Important: To use the plug cutter, one needs to use a drill press and to clamp the wood firmly, as there is no pilot bit to guide the cutter. The counter sink can be used free hand. But, for instance when you must drill near a very small or loose knot, or in splintered wood, where the drill bit might wander, it is better to use a drill press, like with the plug cutter.
The plug cutter can also be used as a peg cutter for small pegs up to 25 mm (1 inch). We have had good results cutting end grain in larch wood.
These sets are good for people who are not looking to make large quantities of plugs or pegs, but who would find it useful to cut a few from time to time. Made in Japan.
All cutters and countersinks have a shaft diameter of 6.35 mm (1/4 inch)

Video - in Japanese language - but the pictures are selfexplanatory!
Plug Cutter and Countersink Set
Diameter
of Plugs
or Dowels
Diameter
of Prehole
Total length Max. Thickness
of Plug
or Length of Dowel
Order nr.Price
8 mm 3 mm 75 mm 25 mm
Price € 25.90
10 mm 3.5 mm 75 mm 25 mm
Price € 27.90
12 mm 4 mm 75 mm 25 mm
Price € 29.90

 

VERITAS Tapered Snug-Plug Cutters
VERITAS Tapered Snug-Plug Cutters
It is always difficult to fit plugs perfectly; any slight runout in your drill-press quill can make the holes oversize. Unfortunately, this runout will also make plugs undersize. The combination leads to ill-fitting plugs that are very noticeable in your finished work. Plugs made with these tapered plug cutters fit always. More ...
Plug size Order nr.Price
6 mm
Price € 11.90
8 mm
Price € 12.30
10 mm
Price € 12.50
Set of 3: 6-8-10 mm
Price € 29.50

VERITAS Power Tenon Cutters (Regular/Standard Type)

VERITAS Power Tenon Cutters For anyone building rustic furniture, the Veritas aluminum-body tenon cutters will cut smooth, perfect tenons with radiused shoulders. Cutters are designed to run vibration-free while being driven by an electric drill, yet still yield the same accuracy when used with a hand brace. The smaller tenon cutters (5/8 to 1 in.) can be used in a hand brace with our Tenon cutter Brace Adaptor. The anodized body has been balanced to eliminate vibration and an integral level vial makes in-line cutting more accurate. Enlargement

To increase safety, the back end of the blade is contoured to avoid anything extending beyond the revolving aluminum body. The body has a built-in honing guide for easy sharpening of blades on a drill-press mounted drum sander (see right). The blade is adjustable to cut the exact size of tenon required in both dry and green wood. Instructions

Available in eight cutting diameters. Sizes 5/8 in. to 1 in. cut 2-3/4 in. long tenons and are typically used for most rustic furniture. Sizes 1-1/4 in. to 2 in. will cut 4-1/4 in. long tenons and are used for larger structural connections, such as bed frame to post, or fence rail to post. All sizes have hex shanks; sizes 5/8 in. to 1 in. have a shank of 8 mm and are for use in an electric drill with a 3/8 in. (or larger) chuck. Sizes 1-1/4 in. to 2 in., which require more torque to drive, have a shank of 11 mm and are for use in larger electric drills with a 1/2 in. (or larger) chuck.

Not for use in a drill press!
Suitable drill bits:
Auger bits in inch-measurements for drilling by hand (non-electric) (recommended)
Auger bits in inch-measurements for electric hand drill (recommended)
Forstner bits in inch-measurements for electric hand drill (if above options are not available)
Recommendation:
The traditional rustic look fit of joints made with the Veritas Standard Tenon Cutter appears even more natural, when the corresponding holes are tapered with the Veritas Taper Reamer.

VERITAS Power Tenon Cutter
building rustic furniture
VERITAS Power Tenon Cutter
For anyone building rustic furniture, the Veritas aluminum-body tenon cutters will cut smooth, perfect tenons with radiused shoulders. The 5/8 - 1 inch sizes have a hex. shank 8 mm, the 1-1/4 - 2 inch sizes have a hex shank 11 mm.

VERITAS Power Tenon Cutter Standard Size
Size inch Size mm Order nr.Price
5/8 15.9
Price € 87.00
3/4 19
Price € 90.00
7/8 22.2
Price € 91.00
1 25.4
Price € 92.00
1-1/4 31.8
Price € 99.00
1-1/2 38.1
Price € 102.00
1-3/4 44.4
Price € 103.00
2 50.8
Price € 105.00
Repl. Blade
Price € 18.50

Sanding drums to sharpen the blade of this power tenon cutter
Tenon Cutter Brace Adapter
Tenon Cutter Brace Adapter
This tapered square-shank adapter is available to let you use the 5/8 in. to 1 in. power tenon cutters with a hand brace. Enlargement and example of use
Takes tools with 8 mm hex shank.
Price € 7.50
VERITAS Mini Tenon Cutter

building rustic furniture
VERITAS Mini Tenon Cutter
Veritas developed these smaller-diameter tenon cutters for use with small stock. Available in 5 cutting diameters from 1/4 in. to 1/2 in. (6.3 mm to 12.7 mm). These tenon cutters are useful in many areas, e.g., members within trellis or lattice work.

All sizes have a straight blade that cuts a 60 ° shoulder tenon (not a radiused shoulder tenon as on the larger sizes).

The 1/4 in., 5/16 in. and 3/8 in. sizes cut tenons up to 1 in. (25.4 mm) long.
The 7/16 in. and 1/2 in. sizes cut tenons up to 1-3/8 in. (34.9 mm) long.

A plug gauge is included for easy blade setting.
3/8 in. (9.5 mm) round shank.
For use in an electric drill, not a drill press.
Instructions

VERITAS Mini Tenon Cutter
Size inch Size mm Order nr.Price
1/4 6.3
Price € 29.90
5/16 7.9
Price € 31.50
3/8 9.5 Currently not in stock!
Price € 32.00
7/16 11.1
Price € 33.00
1/2 12.7
Price € 34.00
Repl. Blade
Price € 6.95

Comparison of cut made by tapered and regular Veritas tenon cutters

Regular Tenon Cutter
Regular Tenon Cutter
The single blade design cuts a radiused shoulder for a traditional rustic looking fit.
Tapered Tenon Cutter
Tapered Tenon Cutter
The dual blade-design cuts a smooth 60° tapered shoulder for a countersunk fit.

Veritas Tapered Tenon Joinery System

Veritas Tapered Tenon Joinery System To make simple, fast work of mortise-and-tenon joinery, this system uses power tenon cutters and matching countersinks to produce strong flush-fitting joints in round or dimensioned stock. The cutters produce a symmetrical tenon with a 60 tapered shoulder that fits neatly in a countersunk socket. The main blade shapes the tenon and shoulder, while a finishing blade smoothes the tenon to a consistent diameter and cuts a slight relief at the base of the shoulder to ensure it seats flush. The finishing blade's cutting depth is adjustable, so you can fine-tune the tenon diameter for close fit.

Cutting capacity for all sizes is 1-1/2" greater than the tenon diameter. Sizes 5/8" to 1" cut 2" long tenons (not including the tapered shoulder) and are for use in drills with a 3/8" or larger chuck. Sizes 1-1/4" to 2" cut 3" tenons and are for use in drills with a 1/2" or larger chuck. All have hex shanks and anodized bodies, and can be used in an electric drill or hand brace (not for use in a drill press).

To shape the tenon socket to match the tenon shoulder, Veritas offers two sizes of countersinks, each with interchangeable bushings sized to match our tenon cutters.

The small countersink comes with 5/8", 3/4", 7/8", and 1" bushings; the large comes with 1-1/4", 1-1/2", 1-3/4", and 2" bushings.

Instructions
Guide d'instruction (français)

Veritas Tapered Tenon Cutters
Veritas Tapered Tenon Cutters
These cutters produce a symmetrical tenon with a 60 tapered shoulder that fits neatly in a countersunk socket.

Veritas Tapered Tenon Cutter
Size inch Size mm Order nr.Price
5/8 15.87
Price € 79.00
3/4 19.05
Price € 81.00
7/8 22.23
Price € 87.00
1 25.4
Price € 89.00
1-1/4 31.75
Price € 96.00
1-1/2 38.1
Price € 99.00
1-3/4 44.45
Price € 102.00
2 50.8
Price € 107.00
Replacement Blades
Main Blade 5/8" to 1"
Price € 15.50
Main Blade 1-1/4" to 2"
Price € 16.50
Repl. Finishing Blade
Price € 14.50

Veritas Countersinks
Veritas Countersinks
Veritas Countersinks
To shape the tenon socket to match the tenon shoulder, Veritas offers two sizes of countersinks, each with interchangeable bushings sized to match our tenon cutters.

Veritas Countersinks
Size Order nr.Price
Small, with Bushings
5/8 - 3/4 - 7/8 - 1"
Price € 85.00
Large, with Bushings
1-1/4 - 1-1/2 - 1-3/4 - 2"
Price € 105.00
Replacement Blades
For small countersink Currently not in stock!
Price € 15.50
For large countersink
Price € 16.50

 
Dieter Schmid - Fine Tools
logo
www.fine-tools.com
You are here:   Homepage   →   Drilling in Wood   →   Tenon Cutters, Tapered Snug Plug Cutters
Inc VAT  |  Shipping is extra  |  Your cart  |  Fast order  |  Contact us  |  Help  |  Deutsch  |  Italiano
nachoben  |  Inc VAT Shipping is extra - view costs  |  About Us  |  Revocation right for consumers  | Terms  |  Data protection declaration  |  Battery disposal