Dieter Schmid - Fine Tools
	Georg-Wilhelm-Str. 7 A - 10711 Berlin - Germany Tel ++49 (0)30 342 1757 - Fax ++49 (0)30 342 1764 Website: www.fine-tools.com

Dieter Schmid - Fine Tools Georg-Wilhelm-Str. 7 A - 10711 Berlin Tel ++49 30 342 1757 - Fax ++49 30 342 1764 Website: www.fine-tools.com

Overview Woodturning Tools

Parting Tools, Oval Skew Chisels, Square End Scrapers, Round Nose Scrapers, Skew Chisels, Scraper Burnisher for Turners

	Knife shaped parting tool extra thin Total length: 230mm Handle length: 127mm Width: 1,6mm Order nr. 303342 Price € 25.90

	Diamond parting tool Total length: 380mm Handle length: 216mm Width: 5mm Order nr. 303343 Price € 37.50

	Parting tool standard
Total   length   Handle   length   Width   of Blade   Width   of Shaft   Order nr.   Price 380 mm 216 mm 3 mm 12 mm 303339 € 28.90 380 mm 216 mm 6 mm 12 mm 303340 € 29.00

	Oval skew chisel Specially developed to allow the blade to move more easily along the tool rest than normal rectangular shaped.
Total length   Handle length   Width   Order nr.   Price 380mm 216mm 19mm 303345 € 31.50 380mm 216mm 25mm 303346 € 37.50

	Skew chisels
Total length   Handle length   Width   Order nr.   Price 380mm 216mm 13mm 303358 € 23.80 380mm 216mm 19mm 303359 € 31.50 380mm 216mm 25mm 303360 € 39.50 520mm 350mm 32mm 303361 € 55.00

	Square end scraper These tools are ideal for finishing both flat bottomed and vonvex projects. The square blade can also be shaped by the user to suit their own requirements.
Total length   Handle length   Width   Order nr.   Preis 380mm 216mm 13mm 303348 € 23.80 380mm 216mm 25mm 303350 € 35.20

	Round nose scraper Also called Domed Scraper. These scrapers are perfect for achieving a smooth finish after shaping has been completed by other tools.
Total length   Handle length   Width   Order nr.   Price 380mm 216mm 13mm 303353 € 23.80 380mm 216mm 19mm 303354 € 31.50 380mm 216mm 25mm 303355 € 38.00

	Scraper Burnisher for Woodturners This tool turns scrapers into cutting tools. Turners who are used to using scrapers with a grinder burr will be amazed at the difference a smooth edge-hook can make. After grinding a scraper, you just deburr the flat face and roll a hook onto the edge. The pressure you use determines the size of the hook. Two 1 in. (25.4 mm) long carbide burnishing rods are supplied. One is ground at 10° for burnishing scrapers with bevels of 70° or 75°. The second rod is ground at 5° to burnish 75° to 80° bevel angles. Since the burnisher (clamped in a vise or screwed to a lathe stand) lets you use your entire body for leverage, you can even put hooks on HSS scrapers, something not possible with any other burnisher. Easy to use, includes full instructions. Designed for use with either full-size or miniature tools. Made of aluminum, steel and carbide. 4-1/2 in. (114 mm) long by 2-5/8 in. (67 mm)wide. Instructions Made by Veritas. Order nr. 307858 Price € 36.50