Bench Vise Hardware, Front Vises, Tail Vises, Screw Spindles
Whether you're updating an old workbench or building a new one, you'll need vises. They can be shoulder vises, front (face) vises, tail vises, any or all of the above, according to your own ideas!
We carry two product lines:
German-made bench screws - front and tail vises, used by well-known German producers of workbenches. These are very precise, rugged, and obviously the product of generations of manufacturing experience.
Front vise hardware made in the Czech Republic - good quality and lower-priced. These feature rolled threads, cast-iron bodies, and precise double guides.
Opening for handle of the T-piece differ in the different products. Take care to choose the appropriate handle!
Front and tail vise hardware made in Germany
Length, excluding T-piece, 360 mm (14 3/16 in.)
Spindle diameter 25 mm
Guide rod diameter 20 mm
Opening for handle 24 mm (15/16 in.)
Weight 5.2 kg (11.5 lbs.)
Order nr. 300655
Price € 65.00
Length, excluding T-piece, 480 mm (18 7/8 in.)
Spindle diameter 30 mm
Guide rod diameter 20 mm
Opening for handle 30 mm (1-3/16 in.)
Weight 8.2 kg (18 lbs.)
Order nr. 300654
Price € 89.00
(will fit only No. 300655 hardware)
These yokes allow precise parallel adjustment of guides, and the setting of initial tension to any desired level.
Will fit only the vise hardware shown above. Order nr. 300665
Price € 27.00
Yoke for large front vise
(will fit only No. 300654 hardware)
Order nr. 300664
Price € 29.00
Length, excluding T-piece, 480 mm
(approx. 18 7/8 in.)
Spindle diameter 26 mm
Guide rod diameter 20 mm
Opening for handle 30 mm (1-5/32 in.)
Weight 9 kg/19.8 lbs.
Make changes from large to small jaw openings without tedious cranking. The quick-release action is simple, smooth and reliable, is actuated by the vise handle, and requires no extra release mechanism.
Order nr. 300651
Price € 125.00
Length, excluding T-piece, 480 mm
(approx. 18 7/8 in.)
Opening for handle 30 mm (1-3/16 in.)
Weight: 13 kg/28.6 lbs.
Order nr. 300652
Regular Price
Now € 125.00
Length, excluding T-piece, 480 mm
(approx. 18 7/8 in.)
Opening for handle 27 mm (1-1/16 in.)
Weight: 13 kg/28.6 lbs.
Order nr. 300653
Price € 210.00
Length: 350 mm (approx. 13-3/4 in.)
Opening for handle 30 mm (1-3/16 in.)
More information
For small or short workbenches
Weight: 7.5 kg/16.5 lbs.
Order nr. 300656
Price € 115.00
Length: 440 mm (approx. 17 5/16 in.)
Opening for handle 30 mm (1-3/16 in.)
More information
For full sized heavy workbenches
Weight: 9 kg/19.8 lbs.
Order nr. 300650
Price € 115.00
Installation of front vises is relatively simple and largely self-explanatory. Installation of tail vises is considerably more complicated. You should have some experience in woodworking before attempting to install a tail vise.
Rene B. used one of our tailvises in building "masterpiece" bench. Click here to view a working drawing, pictures, and instructions, which will give you a better idea of the project that you’re about to undertake. More helpful tips along with explanatory photos are coming from Charles V., who also used our tail vise to build his workbench.
Total length: 400 mm (approx. 15-3/4 in.)
Opening for handle 30 mm (1-3/16 in.)
Weight: 3 kg (6.6 lbs.)
Order nr. 300659
Price € 39.95
Benchscrews and front vises made in the Czech Republic
Total length 400mm ( 15 3/4 in.)
Threads 24 x 5 mm ( 15/16 in. thread dia., 3/16 in. thread depth)
Opening for handle 29 mm (1-3/16 in.)
Weight approx. 2.1 kg (4.6 lbs.)
Order nr. 307754
Price € 27.00
Large Benchscrew
Total length 535 mm (21 in.)
Threads 28 x 5 mm (1 3/32 in. thread dia., 3/16 in. thread depth)
Opening for handle 29 mm (1-3/16 in.)
Weight approx. 3.4 kg (7.5 lbs.)
Order nr. 307750
Price € 29.00
Total length 390mm (15 3/8 in.)
Threads 24 x 5 mm (15/16 in. thread dia., 3/16 in. thread depth)
Opening for handle 29 mm (1-5/32 in.)
Weight approx. 4.0 kg (8.8 lbs.)
Measurements!
Order nr. 307757
Price € 43.50
Total length 550mm (21 5/8 in.)
Threads 28 x 5 mm (1 3/32 in., 3/16 in. thread depth)
Opening for handle 29 mm (1-5/32 in.)
Weight approx. 8.6 kg (19 lbs.)
Measurements!
Order nr. 307758
Price € 59.90
Make your own veneer-press frames or gluing jigs with these extra heavy and sturdy press screws. Screw 28 mm (1-3/32 in.) thick!
Thread length 300 mm (11 3/4 in.)
Threads 28 x 8 mm (1-3/32 in., 3/8 in. thread depth)
Weight approx. 4.3 kg (10 lbs.)
Order nr. 307775
Price für 1 Stück € 54.50
Tommy Bars (Vise Handles)
Opening for handle of the T-piece differ in the different products. Take care to choose the appropriate handle!
beech, synthetic caps
Length 26 cm (approx. 10 in.)
Dia. 22 mm (approx. 7/8 in.)
This handle can be used with the small vise hardware made in Germany only
Order nr. 303139
Price € 6.20
ANKE Large Handle
beech, synthetic caps
Length 31 cm (approx. 12 1/4 in.)
Dia. 26 mm (approx. 1 in.)
This handle can be used with all vise hardware shown on this page (except small German front vise).
Order nr. 303142
Price € 7.80
Maple, wooden screw-on caps
Length 31 cm (approx.12 1/4 in.)
Dia. 28.5 mm (1-1/8 in.)
This handle fits all vises made in the Czech Republic (T-shaped handle 29 mm) and some German vises (if T-shaped handle 30 mm). Please check the item description of the vises before ordering handles!
Order nr. 307974
Price € 6.90
Beech, wooden caps to fix with dowel (included)
Lenght: 35 cm (approx.13 3/4 in.)
Diameter: 27.5 mm (1-3/16 in.)
This tommy bar fits all large vise hardware.
Order nr. 300501
Price € 9.90
