Carver’s Vise, Carver’s Screw
Carver’s vises and Carver’s screws are necessary for secure clamping of workpieces for three-dimensional carving. The tapered part of the carving screw is turned into a predrilled hole in the base or back of the workpiece. The remaining screw is fastened through a hole in the table or through a bench dog hole in the workbench.
Carver’s Screw
with big wing-nut and washer. With a carvr's screw you can fix securely workpieces on tables.
Carver’s Screw length 162 mm (6-3/8 in.)
Diameter screw 12 mm (1/2 in.)
Diameter washer 24 mm (15/16 in.)
Order nr. 300070
Price € 7.50
Carver’s Screw length 229 mm (9 in.)
Diameter screw 16 mm (5/8 in.)
Diameter washer 50 mm (2 in.)
Order nr. 300071
Price € 9.50
with big wing-nut and washer. With a carvr's screw you can fix securely workpieces on tables.
Carver’s Screw length 162 mm (6-3/8 in.)
Diameter screw 12 mm (1/2 in.)
Diameter washer 24 mm (15/16 in.)
Order nr. 300070
Price € 7.50
Carver’s Screw length 229 mm (9 in.)
Diameter screw 16 mm (5/8 in.)
Diameter washer 50 mm (2 in.)
Order nr. 300071
Price € 9.50
STUBAI Carver’s Screw
with big wing-nut and washer.
Size comparison
Carver’s Screw length 180 mm
Order nr. 510301
Price € 62.00
Carver’s Screw length 260 mm
Order nr. 510302
Price € 72.00
with big wing-nut and washer.
Size comparison
Carver’s Screw length 180 mm
Order nr. 510301
Price € 62.00
Carver’s Screw length 260 mm
Order nr. 510302
Price € 72.00
VERITAS Carver’s Vise
This vise allows you to position your workpiece in the most convenient orientation for the work you are doing, while still holding it securely enough to allow significant force to be applied. The clamping mechanism is designed such that the mounting plate is loosely held in place when the clamp is released. This prevents your work from suddenly moving when you release the clamp. For permanent attachment use four screws with washer.
Order nr. 307988
Price € 99.90
This vise allows you to position your workpiece in the most convenient orientation for the work you are doing, while still holding it securely enough to allow significant force to be applied. The clamping mechanism is designed such that the mounting plate is loosely held in place when the clamp is released. This prevents your work from suddenly moving when you release the clamp. For permanent attachment use four screws with washer.
Order nr. 307988
Price € 99.90
Dog Hole Mount Assembly for VERITAS Carver’s Vise
for those who want to have a very secure, but still temporarily and quick-mounting option. This kit allows you to secure the vise to a bench top through 19 mm (3/4 in.) diameter round bench dog holes. 19mm-bits you find on our boring tools page.
Order nr. 307989
Price € 11.90
for those who want to have a very secure, but still temporarily and quick-mounting option. This kit allows you to secure the vise to a bench top through 19 mm (3/4 in.) diameter round bench dog holes. 19mm-bits you find on our boring tools page.
Order nr. 307989
Price € 11.90
Traditional Carver’s Vise
The vise design allows the 100 mm (4 in.) face plate to be raised, lowered, swung and rotated to virtually any position. The mounting plate is designed to be on the right or left of the vise. Clamping unit allows table thickness up to 100 mm (4 in.) Enlargement
Order nr. 300101
Price € 75.00
The vise design allows the 100 mm (4 in.) face plate to be raised, lowered, swung and rotated to virtually any position. The mounting plate is designed to be on the right or left of the vise. Clamping unit allows table thickness up to 100 mm (4 in.) Enlargement
Order nr. 300101
Price € 75.00
