Special Offers
Offers good while supplies last!
JUUMA F-Clamps (Bar clamps) regular size
Malleable steel jaw
Powder oxide finish blue
Cold drawn high carbon steel rail, nickle plated
Carbon steel spindle black
Wooden handle
Plastic protection pads
Malleable steel jaw
Powder oxide finish blue
Cold drawn high carbon steel rail, nickle plated
Carbon steel spindle black
Wooden handle
Plastic protection pads
| Opening | Clamp. depth |
Order nr. |
Price | 6 pieces each |
|---|---|---|---|---|
| 200 mm (8 in.) |
100 mm (4 in.) |
330150  |
€ 6.95 |
€ 4.95 |
| 400 mm (16 in.) |
100 mm (4 in.) |
330152 |
€ 7.95 |
€ 5.95 |
| 600 mm (24 in.) |
100 mm (4 in.) |
330154 |
€ 8.95 |
€ 6.95 |
| 800 mm (32 in.) |
100 mm (4 in.) |
330156 |
€ 11.95 |
€ 7.95 |
| 1000 mm (39 in.) |
100 mm (4 in.) |
330158 |
€ 12.95 |
€ 8.95 |
FISCH Wave Cutter Forstner Bits
Set of 6
Contents: 20, 25, 30, 35, 40, 50 mm
Comes in wooden box
Due to his wave cutting edge design this bit is faster, more precise, and finer than conventional forstner bits. This bit can be re-sharpened up to 30 times. Detail!
Characteristics: with centering point, wavy periphery cutting edge, 2 lifters and reduced cylindrical shank, in premium quality. Up to 30 mm: Shank 8 x 30 mm. From 32 mm: Shank 10 x 30 mm.
Area of application: clean holes in softwood and European hardwoods.
Order nr. 316160
Price € 85.00
Set of 6
Contents: 20, 25, 30, 35, 40, 50 mm
Comes in wooden box
Due to his wave cutting edge design this bit is faster, more precise, and finer than conventional forstner bits. This bit can be re-sharpened up to 30 times. Detail!
Characteristics: with centering point, wavy periphery cutting edge, 2 lifters and reduced cylindrical shank, in premium quality. Up to 30 mm: Shank 8 x 30 mm. From 32 mm: Shank 10 x 30 mm.
Area of application: clean holes in softwood and European hardwoods.
Order nr. 316160
Price € 85.00
Heavy-duty Front Vise
Length, excluding T-piece, 480 mm
(approx. 18 7/8 in.)
Opening for handle 30 mm (1-3/16 in.)
Weight: 13 kg/28.6 lbs.
Order nr. 300652
Regular Price€ 162.00
Now € 125.00
Length, excluding T-piece, 480 mm
(approx. 18 7/8 in.)
Opening for handle 30 mm (1-3/16 in.)
Weight: 13 kg/28.6 lbs.
Order nr. 300652
Regular Price
Now € 125.00
Bormax Forstner Bit Set of 5
in wooden box, 15, 20, 25, 30, 35 mm
Picture left
Order nr. 304688
Price € 98.00
You save EUR 36.30 - and the wooden box is a gift!
Autumn special € 82.10
You save EUR 52.20 - and the wooden box is a gift!
in wooden box, 15, 20, 25, 30, 35 mm
Picture left
Order nr. 304688
Price € 98.00
You save EUR 36.30 - and the wooden box is a gift!
Autumn special € 82.10
You save EUR 52.20 - and the wooden box is a gift!
Adhesive-backed Plastic Measuring Tapes - INCH-graduation
Black figures against a yellow field make these flexible, adhesive-backed plastic measuring tapes easy to read. They are ideal for all kinds of work benches, cutting tables, or any application where it would be useful to have a fixed measuring tape. The tape can be cut easily with scissors to any desired length. Important Advice: Be careful when gluing the band down to a surface. Clean the surface carefully: it must be absolutely clean, especially of any grease or oil.
| To read from | Length | Graduation | Width/thickness | Order nr. | Price |
|---|---|---|---|---|---|
| left to right | 48 inch | inch | 13 x 0.15 mm | 300190 |
|
| right to left | 48 inch | inch | 13 x 0.15 mm | 300195 |
Set, consisting of two Japanese Saws
with 2 single leather sheaths
Set consists of a Ryoba Bakuma, blade length 8 3/8 in. (250 mm) (No. 309310), a Dozuki "Duo" for rip and cross-cuts (No. 312028), one leather sheath for Dozuki (No. 109051), and one leather sheath for Ryoba (No. 109053). This is the ideal set to begin with, because all the customary cuts can be made with these saws. The cross-cut edge of the Ryoba can also be used to cut lumber-core plywood and chipboard. Picture with blades protected in leather sheaths.
Order nr. 312033
Reg. Price single buy: € 65.75
You save € 20.25
Price € 45.50
with 2 single leather sheaths
Set consists of a Ryoba Bakuma, blade length 8 3/8 in. (250 mm) (No. 309310), a Dozuki "Duo" for rip and cross-cuts (No. 312028), one leather sheath for Dozuki (No. 109051), and one leather sheath for Ryoba (No. 109053). This is the ideal set to begin with, because all the customary cuts can be made with these saws. The cross-cut edge of the Ryoba can also be used to cut lumber-core plywood and chipboard. Picture with blades protected in leather sheaths.
Order nr. 312033
Reg. Price single buy: € 65.75
You save € 20.25
Price € 45.50
Set, consisting of two Japanese saws
with large leather sheath for 3 saws This set consists of 1 Ryoba Bakuma 250 mm (nr. 309310), 1 Dozuki "Duo" for ripcut and crosscut and 1 leather bag (nr. 109056). The crosscut side of the Ryoba saw can be used for blockboards and chipboards too. The ideal set for the beginner. It was never cheaper to start with Japanese saws. Compare with other Japanese saws
Reg. Price single buy: € 65.80
You save € 16.30
Order nr. 312030
Now: € 49.50
Replacement blades available at regular price:
Repl. Blade Ryoba: Nr. 309311 € 16.00
Repl. Blade Dozuki: Nr. 312029 € 13.95
with large leather sheath for 3 saws This set consists of 1 Ryoba Bakuma 250 mm (nr. 309310), 1 Dozuki "Duo" for ripcut and crosscut and 1 leather bag (nr. 109056). The crosscut side of the Ryoba saw can be used for blockboards and chipboards too. The ideal set for the beginner. It was never cheaper to start with Japanese saws. Compare with other Japanese saws
Reg. Price single buy: € 65.80
You save € 16.30
Order nr. 312030
Now: € 49.50
Replacement blades available at regular price:
Repl. Blade Ryoba: Nr. 309311
€ 16.00Repl. Blade Dozuki: Nr. 312029
€ 13.95
Set: Dozuki Short + 1 Repl. Blade
mainly for crosscut. Set consisting of saw nr. 312038 and Replacement blade nr. 312039.
Enlargement
Blade length: 190 mm (7-1/2 in.)
Blade thickness: 0.3 mm (0.012 in.)
total length: 410 mm (16 in.)
Kerf: 0.45 mm (0.018 in.)
Pitch: 18 TPI (1.4 mm)
Comes with plastic handle
Reg. price saw: € 20.90
Reg. price blade: € 13.20
You save: € 12.20
Order nr. 312035
Now: € 21.90
mainly for crosscut. Set consisting of saw nr. 312038 and Replacement blade nr. 312039.
Enlargement
Blade length: 190 mm (7-1/2 in.)
Blade thickness: 0.3 mm (0.012 in.)
total length: 410 mm (16 in.)
Kerf: 0.45 mm (0.018 in.)
Pitch: 18 TPI (1.4 mm)
Comes with plastic handle
Reg. price saw: € 20.90
Reg. price blade: € 13.20
You save: € 12.20
Order nr. 312035
Now: € 21.90
Set, consisting of two small Japanese Saws
This set consists of a Dozuki "Duo" short for ripcut and crosscut (nr. 312036) and a short crosscut Kataba (nr. 312040). Blade length of both saws is 190 mm. This is the ideal set for the building site, also suitable for plywood and MDF. Packed in transparent plastic bag
Reg. Price single buy: € 39.80
Compared with single purchase you save € 8.00
Order nr. 312034
Price € 31.80
This set consists of a Dozuki "Duo" short for ripcut and crosscut (nr. 312036) and a short crosscut Kataba (nr. 312040). Blade length of both saws is 190 mm. This is the ideal set for the building site, also suitable for plywood and MDF. Packed in transparent plastic bag
Reg. Price single buy: € 39.80
Compared with single purchase you save € 8.00
Order nr. 312034
Price € 31.80
Set of mitre spring clamps
Consisting of 48 wire spring clamps and special pliers. There are six sizes with 8 pieces each, and purpose-made light alloy pliers to spread them. The set comes in a plastic box. The smallest clip has a mouth of 15 mm, the largest one 55 mm.
For picture frames, furniture making, and in any other application where small mitred parts must be clamped for gluing, these clamps will prove very useful. One can easily and accurately apply high clamping pressure with one hand, while the other is free to hold the pieces in the correct position. The clamps are made of spring steel with points ground into each end.
Enlargement
Plastic box closed
Plastic box open
Seconds! Why? After the first use, one might notice that the mouth of the clamps is a few millimeters wider than when new. But thereafter, the spring steel firms up, and they will not stretch or deform appreciably during further use, making them indefinitely reusable. For the price, they are a good deal!
Order nr. 300199
Price € 29.90
Consisting of 48 wire spring clamps and special pliers. There are six sizes with 8 pieces each, and purpose-made light alloy pliers to spread them. The set comes in a plastic box. The smallest clip has a mouth of 15 mm, the largest one 55 mm.
For picture frames, furniture making, and in any other application where small mitred parts must be clamped for gluing, these clamps will prove very useful. One can easily and accurately apply high clamping pressure with one hand, while the other is free to hold the pieces in the correct position. The clamps are made of spring steel with points ground into each end.
Enlargement
Plastic box closed
Plastic box open
Seconds! Why? After the first use, one might notice that the mouth of the clamps is a few millimeters wider than when new. But thereafter, the spring steel firms up, and they will not stretch or deform appreciably during further use, making them indefinitely reusable. For the price, they are a good deal!
Order nr. 300199
Price € 29.90
Hammer Holder
for carrying tools on belt, leather and riveted steel loop
Order nr.: 109060
Reg. Price: € 3.50
Now € 1.50
for carrying tools on belt, leather and riveted steel loop
Order nr.: 109060
Reg. Price: € 3.50
Now € 1.50
Bormax3 Carbide tipped Forstner Bits, Set of 5
in wooden box, 15, 20, 25, 30, 35mm
Order nr. 304618
Reg. Price € 269.00
Now € 179.00
in wooden box, 15, 20, 25, 30, 35mm
Order nr. 304618
Reg. Price € 269.00
Now € 179.00
Forstner bits in INCH-measurements from old stock - Special offer!
These Forstner bits come from a German tool factory shut down a while ago. They have been stocked for several years and have not been used. They come in best condition, but can have some minor rust spots at the shaft (not at the protected cutters). Quality made in Germany!
These Forstner bits come from a German tool factory shut down a while ago. They have been stocked for several years and have not been used. They come in best condition, but can have some minor rust spots at the shaft (not at the protected cutters). Quality made in Germany!
| Diameter inch |
Diameter mm |
Shaft | Total length | Cutting length | Order nr. | Price |
|---|---|---|---|---|---|---|
| 1-1/8 inch | 28,58 mm | 8 mm | 90 mm | 60 mm | 308240 |
€ 9,95 |
| 1-1/4 inch | 31,75 mm | 9,5 mm | 90 mm | 60 mm | 308241 |
€ 10,95 |
| 1-3/4 inch | 44,45 mm | 9,5 mm | 90 mm | 60 mm | 308243 |
€ 11,95 |
| 1-7/8 inch | 47,63 mm | 10 mm | 90 mm | 60 mm | 308244 |
€ 11,95 |
| 2 inch | 50,80 mm | 9,5 mm | 90 mm | 60 mm | 308245 |
€ 13,95 |
| 2-1/8 inch | 53,98 mm | 9,5 mm | 90 mm | 60 mm | 308246 |
€ 12,95 |
Forstner bits in mm-measurements from old stock - Special offer!
These Forstner bits come from a German tool factory shut down a while ago. They have been stocked for several years and have not been used. They come in best condition, but can have some minor rust spots at the shaft (not at the cutters). Quality made in Germany!
These Forstner bits come from a German tool factory shut down a while ago. They have been stocked for several years and have not been used. They come in best condition, but can have some minor rust spots at the shaft (not at the cutters). Quality made in Germany!
| Diameter mm | Shaft | Total length | Cutting length | Order nr. | Price |
|---|---|---|---|---|---|
| 25 mm | 8 mm | 92 mm | 60 mm | 308250 |
€ 6,95 |
| 32 mm | 10 mm | 92 mm | 60 mm | 308251 |
€ 7,95 |
| 34 mm | 10 mm | 92 mm | 60 mm | 308252 |
€ 7,95 |
ANANT Smoothing Plane no. 4
Weight: 1600 g.
Length: 247 mm
Blade width: 50 mm
Order nr. 300002
Price€ 22.60
Now € 19.90
Weight: 1600 g.
Length: 247 mm
Blade width: 50 mm
Order nr. 300002
Price
Now € 19.90
Vise, swinging through three axes
to be attached to most working surfaces with integral clamp
It is thus instantly possible to set up the vise, and just as quick to dismantle it. Maximum thickness of table top 75 mm. Removing both - clamp and swinging jig - lets you get a sturdy standard vise.
Length of jaws 63 mm
Jaw opening 55 mm
Weight approx. 7.5 kg
Order nr. 307763
Reg. Price € 73.00
Now € 53.00
to be attached to most working surfaces with integral clamp
It is thus instantly possible to set up the vise, and just as quick to dismantle it. Maximum thickness of table top 75 mm. Removing both - clamp and swinging jig - lets you get a sturdy standard vise.
Length of jaws 63 mm
Jaw opening 55 mm
Weight approx. 7.5 kg
Order nr. 307763
Reg. Price € 73.00
Now € 53.00
Book: Traditional Windsor Chair Making
by Jim Rendi
112 pages, many explanatory photographs, softback
Order nr. 305026
Price€ 33.00
Now € 15.00
Basic, step-by-step instructions for building a comb back Windsor chair, using traditional methods. With the simplest of hand tools and a lathe, even the amateur can produce a beautiful chair. Each step is illustrated and the patterns for the parts are given, among with measured drawings.
by Jim Rendi
112 pages, many explanatory photographs, softback
Order nr. 305026
Price
Now € 15.00
Basic, step-by-step instructions for building a comb back Windsor chair, using traditional methods. With the simplest of hand tools and a lathe, even the amateur can produce a beautiful chair. Each step is illustrated and the patterns for the parts are given, among with measured drawings.
