| |
|
Dieter Schmid - Fine Tools |
Georg-Wilhelm-Str. 7 A - 10711 Berlin - Germany Tel ++49 (0)30 342 1757 - Fax ++49 (0)30 342 1764 Website: www.fine-tools.com
|
|
Dieter Schmid - Fine Tools
Georg-Wilhelm-Str. 7 A - 10711 Berlin Tel ++49 30 342 1757 - Fax ++49 30 342 1764 Website: www.fine-tools.com
|
|
Vises, Cabinetmaker's Vises, Mini Vises
|
|
HEUER industrial class vises are made of forged steel.
These high-quality, purely functional mechanical products are
not influenced by trends or fashions. They are made in Germany to the highest standards.
The English made woodworking vises made by RECORD are no longer available. Now we are lucky to have found a new supplier.
Don't miss to have a look to our vises, capable of swinging through three axes.
Our Mini-Vises made of cast iron are very useful for all small jobs
The Hand Vise made by STARRETT has a wide range of uses
|

Woodworking Vise Type 52 more...

Woodworking Vise Type 52 1/2 more...
Woodworking Vise Type 53ED more...
|
Professional Woodworking Vise Type 52
Professional Woodworking Vise Type 52 1/2
Professional Woodworking Vise Type 53ED
all with Quick Release Mechanism
These vises are equipped with the quick-release mechanism reducing fatigue and speeds up operation.
The adjustable front stop or "dog" gives an additional clamping facility when used in conjunction with a bench stop.
Body and sliding jaw have ready provision for attaching wooden cheeks to help protect both vise and working tools. Saves time.
Quality product made in the European Union!
Mounting screws not included! Have a look to our mounting instructions!
For 52
For 52 1/2
Woodworking Vise Type 52
Jaw-surface width 178 mm (7 in.)
Opens to 210 mm (8 1/4 in.)
Jaw-surface height 77 mm (3 in.)
Weight 9 kg (20 lbs)
Diameter of thread 24 mm (15/16 in.)
Diameter of rods 22 mm (7/8 in.)
With Quick Release!
Order nr.
307779
Price € 94.00
Woodworking Vise Type 52 1/2
Jaw-surface width 230 mm (9 in.)
Opens to 342 mm (13 1/2 in.)
Jaw-surface height 105 mm (4 in.)
Weight 15.7 kg (34.6 lbs)
Diameter of thread 24 mm (15/16 in.)
Diameter of rods 25 mm (1 in.)
With Quick Release!
Order nr.
307780
Price € 119.00
Woodworking Vise Type 53ED
Jaw-surface width 267 mm (10-1/2 in.)
Opens to 395 mm (15 1/2 in.)
Jaw-surface height 105 mm (4 in.)
Weight 18 kg (40 lbs)
Diameter of thread 24 mm (15/16 in.)
Diameter of rods 25 mm (1 in.)
With Quick Release!
Order nr.
307781
Price € 134.00
|
|
Veritas Twin-Screw Vise
This is the only non-racking full-width end vise on the market. You can clamp anything anywhere in the vise and the jaws stay parallel.
The chain drive ensures parallelism and eliminates the racking common in other vises. It can be operated using either handle. More ...
A 38 mm (1-1/2 in.) bit is needed to drill four holes.
Assembled Vise shown! Wooden Jaws not included!
2 Tommy bars included!
Weight 9.7 kg (21.4 lbs)
Order nr.
307977
Price € 209.00
|
|
Long Cover for Veritas Twin-Screw Vise
For anyone requiring wider jaw capacity, this long cover accommodates vise screw centers up to 600 mm (24 in.), with sufficient chain to match.
Weight 1.2 kg (2.7 lbs)
Order nr.
307978
Price € 25.50
|
|
Workbench Vise - Rotating Pattern Maker's Vise
This versatile woodworking vise does not only hold the workpiece. The position of the workpiece can be changed without releasing it. All functions described here and a wooden handle are included. Comes with assembly and operating instructions.
This vise is a Taiwan made copy of the famous "Emmert Vise", patented 1902 in the USA.
Clamping capacity 355 mm (14 in.)
Jaw width 350 mm (13-3/4 in.)
Weight 28 kg (60 lbs)
Order nr.
300210
Price € 259.00
|
Heuer Compact Bench Vise
The HEUER Compact thanks its name to its very efficient design. Functionality was a key factor here and this with the customary high quality of Brockhaus HEUER. With a weight of 4.5 Kg and a powerful griping power of 10 kN it is the lightweight in its category. The ingenious thing about it is the all new, revolutionary quick adjusting HEUER Quicklaunch. Thanks to this, large jaw width differences can be adjusted on the HEUER Compact in just the turn of a hand. More ...
Width of jaws 120 mm
Opening 130 mm
Clamping depth 65 mm
Weight 4.5 kg
Order nr. 302480
Price € 159.95
|
Click picture for a magnified view!
|
Heuer Vise
HeuerŪ Vises made of forged steel are stronger than cast iron vises. Forged steel allows a lighter design and they are unbreakable.
Jaw Width 100 mm / 4"
Vise opening capacity 125 mm / 5"
Clamping Depth 50 mm / 2"
Weight 4,5 kg / 10 lb
Order-nr.
302450
Price € 129.90
Jaw Width 120 mm / 4-3/4"
Vise opening capacity 150 mm / 6"
Clamping Depth 65 mm / 2-1/2"
Weight 9 kg / 20 lb
Order-nr.
302459
Price € 169.95
|
|
Heuer Vise with Replaceable Jaws
Same Quality as above, but with replaceable jaws. The jaws are hardened, one side corrugated and the other side ground plain.
Click on the picture for a magnified view!
Jaw-surface Width 120 mm / 4-3/4"
Vise-opening Capacity 150 mm / 6"
Clamping depth 65 mm / 2-1/2"
Weight 9,0 kg / 20 lb
Order-nr.
302460
Price € 219.90
|
|
Swivelling Base for HEUER Vises
Thanks to the HEUER Rotary-Table the vice can be rotated 360° on one level exactly in the position that you need for working on a given item. The robust setting with a small spindle key enables the rotary table - and therefore the vice - to be precisely and firmly set to the required position.
Swivelling Base for HEUER Vise
with Jaws 100 mm
also suitable for Heuer Compact with jaws 120 mm
Order-nr. 302451
Price € 37.50
Swivelling Base for HEUER Vise
with Jaws 120 mm
Order-nr. 302461
Price € 55.50
|
|
Table Clamp for Heuer Vises
The HEUER Table-Clamp is perfect for fastening the vice firmly to the working plate. With it, the vice -without the necessity of boring holes- can be mounted and removed from the working plate rapidly and without damage. This frees up space on the work surfaces and avoids the time-consuming mounting and removal of the whole vice from the workbench.
Picture: table clamp with vise
Measurements - important when using other vises with this table clamp
Table Clamp for Heuer Vise
with Jaws 100 mm
also suitable for Heuer Compact with jaws 120 mm
Order-nr. 302452
Price € 35.70
Table Clamp for Heuer Vise
with Jaws 120 mm
Order-nr. 302467
Price € 52.30
|
|
Heuer-Lift
Automatic Lift for Heuer-Vises with a Jaw-surface Width of 120 mm
for ergonomic working.
Items of different height, sizes and shapes requiring a variety of work, are effortlessly accommodated with the HEUER-Lift equipment.
Releasing the clamping force by turning the safety lever allows the vice to be put into the required working position with no effort. A gas shock absorber, specially tuned to the weight of the vice, makes the vice practically weightless. At the optimum working position the vice is then locked in place.
Important: the Lift shown here is suitable only for Heuer vises with Jaw-surface width of 120 mm!
Height-adjustable 0-200mm
with 360° rotation
Weight 9 kg
Comes without vise!
Order-nr.
302462
Price € 174.00
|
Enlargement!
|
Magnefix-jaw Blocks for Heuer Vises with Jaw-surface Width of 120 mm
They have a strong basic form made out of Aluminium or are produced completely out of Polyurethane (PP and PR).
The profile is right-angled and the faces are flat and parallel; the high precision of the HEUER vices are maintained. The integral special magnets hold the Magnefix jaw blocks securely on the vice. Despite extremely high magnetic force, the magnetism does not penetrate the clamping faces, so that neither the clamping force of the blocks is affected, nor a magnetising of the piece takes place.
Jaw blocks width of 120 mm Price per Pair!
| Type |
Order nr. |
Price |
Aluminium - type N Clamping of rough to medium machined workpieces |
302476 |
€ 26.20 |
Felt - type Fi Clamping of extremely delicate workpieces |
302475 |
€ 33.90 |
Rubber - type G Clamping of thin walled tubes and shaped pieces, wood and plastic parts |
302473 |
€ 29.30 |
Aluminium Prismn - type P Clamping of workpieces of various shapes |
302472 |
€ 31.10 |
Fibre - type F Clamping of workpieces with finely machined or polished faces |
302474 |
€ 29.30 |
Polyurethane grooved - type PR Clamping of all types of delicate workpieces |
302470 |
€ 29.30 |
Polyurethane prism - type PP Clamping of delicate round and oval workpieces |
302471 |
€ 29.30 |
|
 |
Vise, swinging through three axes, to be fixed with screws on the table top
This vise, made in the Czech Republic, is made entirely of steel and cast iron, capable of swinging through three axes. It makes working on the stock very easy, as the ball joint can be fixed in almost any position you choose. The jaws have been hardened to 52 - 54 HRC and there is a mini anvil on the back of the vice. Requires 4 screws (not included in scope of delivery) to secure it to the table top. This vise is absolutely solid and sturdy, an excellent buy for the price. Click on the photograph to see an enlargement!
Length of jaws 63 mm
Jaw opening 55 mm
Weight approx. 7 kg
Order-nr.
307760
Price € 69.00
|
 |
Vise, swinging through three axes, to be attached to most working surfaces with integral clamp
Vise capable of swinging through three axes as above, but with a clamp for fixing to table tops. It is thus instantly possible to set up the vise, and just as quick to dismantle it. Maximum thickness of table top 75 mm. Removing both - clamp and swinging jig - lets you get a sturdy standard vise. This vise is available in two sizes.
Length of jaws 63 mm
Jaw opening 55 mm
Weight approx. 7.5 kg
Order-nr.
307763
Price € 73.00
Length of jaws 100 mm
Jaw opening 70 mm
Weight approx. 10.2 kg
Order-nr.
307766
Price € 115.00
Now € 65.00
|
|
Mini-Vise
This mini-vise is suited for all kind of small work. Made of solid cast iron, it will be a pleasure to use it.. With v-groove horizontal and vertical to clamp pipes!
Size of jaws 45 mm (1-3/4 in.), jaw opening 50 mm (2 in.), weight 0.6 kg, Over-all-length when jaws are closed 100 mm (4 in.). Max. thickness of table: 30 mm (1-3/16 in.) Enlargement!
Order nr.
307770
Price € 27.50
|
|
Mini-Vise - capable of swinging through three axes
as above, but capable of swinging through three axes, weight 0.9 kg. There is no need to own a 36mm-spanner to fix the ball joint, a simple pipe wrench will do the job. Max. thickness of table: 52 mm (2 in.)
Order nr.
307772
Price € 37.50
|
 |
Hand Vise made by STARRETT
This hand vise has a wide range of uses for all toolmakers, mechanics, hobbyists and do-it-yourselfers. When a vise is needed at different lications for convenience, this tool is indispensible. The jaws are made from forgings and are properly tempered, the clamping face of the jaw is fine corrugated with one prism for round workpieces. Click on the picture for enlarged views!
Opens to 38 mm, Weight 580 g
Order nr.
306561
Price € 162.00
|
|
 |
Combination Hand Vise made by STARRETT
As above, with handle too, and with clamp to fasten the vise to benches or tables up to a thickness of 55 mm.
Opens to 38 mm, Weight 980 g
Order nr.
306560
Price € 219.00
|
|
|