Adjustable Corner Clamp, Frame Clamp, Mitre Vise, Spring Clamps with Gripper
Adjustable Corner Clamp with steel tape 7 m (23 ft) long
4 Aluminium jaws on a roll of steel tape extendable to 7 m make the clamping of frames and odd-shaped bodies quite simple and secure.
See how it works!
Order nr. 300150
Price € 39.50
Replacement steel tape 7 m (23 ft) long
Order nr. 300151
Price € 15.50
4 Aluminium jaws on a roll of steel tape extendable to 7 m make the clamping of frames and odd-shaped bodies quite simple and secure.
See how it works!
Order nr. 300150
Price € 39.50
Replacement steel tape 7 m (23 ft) long
Order nr. 300151
Price € 15.50
Bessey Band Clamp BAN700
Clamping curves, polygonal connections and closed contours are traditionally some of the most difficult clamping jobs. BESSEY has come up with a startling solution to this problem: in the form of the patented band clamp BAN 700, and the practical Vario corners. These two products are suitable for all those situations where gentle, non-warping, all-round clamping is needed. Universally applicable. For wood and plastic as well as in metal construction. Secured by an automatic locking system that ensures even tractive forces on both sides, which do not slacken until the clamp is released.
Clamping range up to 7 m (example: square body length 1.75 m each side)
Band width 25 mm
Band thickness 1 mm
4 Vario corners included
Order nr. 317510
Price € 35.90
Clamping curves, polygonal connections and closed contours are traditionally some of the most difficult clamping jobs. BESSEY has come up with a startling solution to this problem: in the form of the patented band clamp BAN 700, and the practical Vario corners. These two products are suitable for all those situations where gentle, non-warping, all-round clamping is needed. Universally applicable. For wood and plastic as well as in metal construction. Secured by an automatic locking system that ensures even tractive forces on both sides, which do not slacken until the clamp is released.
Clamping range up to 7 m (example: square body length 1.75 m each side)
Band width 25 mm
Band thickness 1 mm
4 Vario corners included
Order nr. 317510
Price € 35.90
Set of 6 Bessey Vario Corners BVE
Angle range 60° - 180°
Extra set as replacement or for clamping of multi-corner bodies. Notice: the band clamp above includes 4 Vario corners.
Order nr. 317511
Price € 11.50
Angle range 60° - 180°
Extra set as replacement or for clamping of multi-corner bodies. Notice: the band clamp above includes 4 Vario corners.
Order nr. 317511
Price € 11.50
VERITAS Frame Clamp
This is a fast 4-way clamp ideal for picture framing and boxes. Speed-clamping nuts eliminate time-consuming threading. The maximum capacity is 23 in./57cm square. This frame clamp can be used as ordinary clamp too, see picture below.
Order nr. 307975
Price for complete set € 37.70
Extension set (no picture)
consisting of 4 threaded rods and coupling nuts to increase the clamping capacity to 44 in./110cm square.
Order nr. 307976
Price for complete extension set: € 11.20
This is a fast 4-way clamp ideal for picture framing and boxes. Speed-clamping nuts eliminate time-consuming threading. The maximum capacity is 23 in./57cm square. This frame clamp can be used as ordinary clamp too, see picture below.
Order nr. 307975
Price for complete set € 37.70
Extension set (no picture)
consisting of 4 threaded rods and coupling nuts to increase the clamping capacity to 44 in./110cm square.
Order nr. 307976
Price for complete extension set: € 11.20
Picture framer with extension set included
The maximum capacity is 23 in./57cm square without extension set, 44 in./110cm square with extension set. Notice: This set comes with conventional nuts, time consuming threading must be considered when sizes of workpieces change.
Set consisting of:
4 corner pieces
4 knurled screws
4 extension nuts
8 threaded rods 60 cm long
Order nr. 300108
Price € 22.50
The maximum capacity is 23 in./57cm square without extension set, 44 in./110cm square with extension set. Notice: This set comes with conventional nuts, time consuming threading must be considered when sizes of workpieces change.
Set consisting of:
4 corner pieces
4 knurled screws
4 extension nuts
8 threaded rods 60 cm long
Order nr. 300108
Price € 22.50
Miter Vise - Professional Picture Framer
Heavy, cast iron vice to help cut and glue precise 90-degree angles for picture frames and boxes. This vice can be turned 360 degrees and tipped 90 degrees and can be solidly fixed with screws or bolts to a work surface. An important feature of this vice is that imperfect joints can be recut in place in this vice for a great fit every time. More...
Weight approx. 6 kg (14 lbs)
Jaw width 104 mm (4 in.)
Jaw height 7 mm (1/4 in.)
Order nr. 300211
Price € 65.00
Notice: inaccurate mitres can be recut with this mitre trimmer too.
Heavy, cast iron vice to help cut and glue precise 90-degree angles for picture frames and boxes. This vice can be turned 360 degrees and tipped 90 degrees and can be solidly fixed with screws or bolts to a work surface. An important feature of this vice is that imperfect joints can be recut in place in this vice for a great fit every time. More...
Weight approx. 6 kg (14 lbs)
Jaw width 104 mm (4 in.)
Jaw height 7 mm (1/4 in.)
Order nr. 300211
Price € 65.00
Notice: inaccurate mitres can be recut with this mitre trimmer too.
ULMIA Spring Clamps
ULMIA’s special spring clamps are useful in many situations. Whether the work is picture framing or cabinet making, wherever there is a need to glue together tiny mitred corners, these spring clips are just the thing. With the gripper in one hand a strong but accurate clamping force can be exerted while the other hand keeps the parts to be joined in exactly the right position. The clamps are made of high grade hardened spring steel and their gently ground points will to all practical purposes avoid the stock being damaged. The grippers are made of light metal.
Full Set of Spring Clamps
8 in each size, i.e. 48 clamps in all, with one gripper. The whole range for the professional - packaged to be easy to see and take out. The transparent lid of the box shows the applications and the area clamped.
Special offer:
With free wooden box worth € 19.00
Order nr. 300410
Price € 105.00
Additional wooden box for spring clamp set
Made of beech
Size outside: 330 x 270 x 50 mm
Size inside: 310 x 250 x 40 mm
Order nr. 300409
Price € 19.00
Gripper only (no picture)
Order nr. 300417
Price € 31.70
Set of 10 Spring Clamps
ULMIA’s special spring clamps are useful in many situations. Whether the work is picture framing or cabinet making, wherever there is a need to glue together tiny mitred corners, these spring clips are just the thing. With the gripper in one hand a strong but accurate clamping force can be exerted while the other hand keeps the parts to be joined in exactly the right position. The clamps are made of high grade hardened spring steel and their gently ground points will to all practical purposes avoid the stock being damaged. The grippers are made of light metal.
Full Set of Spring Clamps
8 in each size, i.e. 48 clamps in all, with one gripper. The whole range for the professional - packaged to be easy to see and take out. The transparent lid of the box shows the applications and the area clamped.
Special offer:
With free wooden box worth € 19.00
Order nr. 300410
Price € 105.00
Additional wooden box for spring clamp set
Made of beech
Size outside: 330 x 270 x 50 mm
Size inside: 310 x 250 x 40 mm
Order nr. 300409
Price € 19.00
Gripper only (no picture)
Order nr. 300417
Price € 31.70
Set of 10 Spring Clamps
| Size | for board width | clamping width | Order nr. | Price |
|---|---|---|---|---|
| a | 10 - 15 mm | 9 mm | 300411 |
€ 11.00 |
| b | 15 - 25 mm | 15 mm | 300412 |
€ 11.20 |
| c | 20 - 30 mm | 20 mm | 300413 |
€ 13.50 |
| d | 25 - 45 mm | 35 mm | 300414 |
€ 14,95 |
| e | 40 - 70 mm | 45 mm | 300415 |
€ 15,60 |
| f | 65 - 90 mm | 65 mm | 300416 |
€ 15,75 |
Currently we offer Taiwan made spring clamp sets at a very low price!
